*This part replaces obsolete part #: 545213801, 5752918-01 and 575291801.
Product Information
Description:
This item has been sourced from the original manufacturer and is intended to be used with trimmers from Poulan and Husqvarna. The coupler is used to connect the upper and lower portions of the drive shaft assemblies. This item is sold as an individual replacement part. |
Frequently Purchased With
Compatibility
the 26 compatible machines
This part is compatible with the following machines:
Poulan
PP335 (2010) Gas Trimmer
PP133 Pro Gas Trimmer
PP333 Trimmer
PP330 Gas Trimmer
SM30SB 30cc Gas Trimmer
PPB330 (1) Grass Line Trimmer, Gas
PPB330 (1) Grass Line Trimmer, Gas
PPB330 (2) Grass Line Trimmer, Gas
PP133 Pro Gas Trimmer
PP333 Trimmer
PP330 Gas Trimmer
SM30SB 30cc Gas Trimmer
PPB330 (1) Grass Line Trimmer, Gas
PPB330 (1) Grass Line Trimmer, Gas
PPB330 (2) Grass Line Trimmer, Gas
PPB330 (2) Grass Line Trimmer, Gas
PPB330 (3) Grass Line Trimmer, Gas
PPB330 (3) Grass Line Trimmer, Gas
PP428S (2012-12) Trimmer
PPB335 (Type 1) Gas Trimmer
PP130-579060601 (2011-10) Gas String Trimmer
PP335 Gas Trimmer
PP125E (967112801) Trimmer
PPB330 (3) Grass Line Trimmer, Gas
PPB330 (3) Grass Line Trimmer, Gas
PP428S (2012-12) Trimmer
PPB335 (Type 1) Gas Trimmer
PP130-579060601 (2011-10) Gas String Trimmer
PP335 Gas Trimmer
PP125E (967112801) Trimmer
Husqvarna
128LD 952711969 2010-06 Trimmer/Edger
128LD 952711969 2010-06 Trimmer/Edger
128CD 28cc Gas Line Lawn Trimmer
128LD 952711969 2010-06 Trimmer/Edger
128CD 28cc Gas Line Lawn Trimmer
Craftsman
Products Compatibility
This item works with the following types of products:
- • Edger
- • Grass Trimmer
- • Trimmer
Questions & Answers for Assembly Coupler, Black
Does this coupler contain the short screw used to connect it to the main shaft?
Stephen
asked on 2023-11-24
Hello Stephen, Thank you for writing. The Screw is included with the Coupler. We hope this helps!
eReplacementParts Team November 24, 2023
Repair Instructions: Submitted by Customers Like You
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
adaptor broke
removed and replaced adaptor
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pruner
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set, Allen wrench
Throttle trigger broken, coupling for shaft housing needed updating, chain bar worn
Removed handle screws so it could be separated in two parts, removed old and installed new throttle trigger. Reassembled handle. Removed old coupler from shaft housing. Made bushing by cutting an inch of pcv in half, because old coupler was small on one end and new one was large on both ends. The new coupler works much better than the old model. Removed old saw bar by removing chain adjusting nut and housing. Removed bar and chain. Installed chain on bar and reversed procedure. My pole saw is good as new without spending a lot of money, thanks to E REPLACEMENT PARTS.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
leak gas through the cap
install the gas cap husqvarna 128ld trimmer work great assy coupler use screwdriver
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Trigger assembly broke and coupler was worn
Replaced trigger -
Removed bolts from coupler and separated upper and lower drive shaft
Removed coupler from upper drive shaft
Removed screws from trigger handle.
Separated handles halves and slipped throttle cable from trigger
Removed throttle return spring and handle from trigger
Slid trigger down drive shaft to remove
installed new trigger, replaced spring and throttle cable
Re-assembled handle halves and replace screws
Tested trigger for proper function and return unit to service.
Replaced Coupler-
I removed nut and bolts holding coupler to drive shaft
Removed drive shaft with trimmer head
Removed coupler from remaining shaft (this was done to access old trigger)
(After trigger replacement) Installed new coupler
Re-installed drive shaft with trimmer head
Replaced bolts/nuts and secured to drive shaft
Removed bolts from coupler and separated upper and lower drive shaft
Removed coupler from upper drive shaft
Removed screws from trigger handle.
Separated handles halves and slipped throttle cable from trigger
Removed throttle return spring and handle from trigger
Slid trigger down drive shaft to remove
installed new trigger, replaced spring and throttle cable
Re-assembled handle halves and replace screws
Tested trigger for proper function and return unit to service.
Replaced Coupler-
I removed nut and bolts holding coupler to drive shaft
Removed drive shaft with trimmer head
Removed coupler from remaining shaft (this was done to access old trigger)
(After trigger replacement) Installed new coupler
Re-installed drive shaft with trimmer head
Replaced bolts/nuts and secured to drive shaft
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
10 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
1
3 stars
1
2 stars
0
1 stars
1
< PREV
- 1
Husqvarna Weed Eater Clamp
Perfect fit. The old handle threads had stripped out after many swaps between weed eating and chain sawing.
Decent price too.
Thanks.
Guest -
July 20, 2023
Verified Purchase
I would definitely recommend their service.
I ordered a part that was on back order and they keep me informed on my order and sent it to me as soon as the part came in. I would definitely recommend them to anyone.
Guest -
March 5, 2023
Verified Purchase
weed eater part
Quick and easy
Guest -
September 5, 2022
Verified Purchase
Fast Shipping
Part was shipped quickly
Guest -
October 14, 2020
Verified Purchase
Coupler assy
The product was perfect the my machine. It was a simple swap and a quick delivery after order
Guest -
May 8, 2020
Verified Purchase
Easy to replace.
Arrived on time. Works great
Guest -
November 26, 2019
Verified Purchase
Easy repair and working great.
Arrived quickly and looking better than original part.
Guest -
August 7, 2019
Verified Purchase
Not quite right but OK
The service was great and the part came well within suggestion time. The part, however, did not fit well. The end that attached to my motor was larger diameter than it needed to be and I had to shim the motor and in order to put it on. So far after using it twice, I have had trouble fitting the tools into the motor, And removing them. I hope this will get better as I use it.
Guest -
September 4, 2021
Verified Purchase
Wrong Part
It was to be black, it was not. Told me it was a replacement part. Much to large, fits over the shaft after it was tightened. It is no piece of cake trying to deal with your company. Would not use you again.
Guest -
April 4, 2020
Verified Purchase
wrong part
This is the second time I ordered this part for my weed wacker. Again WRONG PART. I did return the first one and received a credit back to my card. I,m keeping this one to remind me not to order from you again.
Guest -
May 5, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information