eReplacementParts.com
877-346-4815
Troy-Bilt Parts
Repair Parts Home
  
Lawn Equipment Parts
  
Troy-Bilt Parts
  192914GS Chemical Injection Kit

Install
Videos!
Chemical Injection Kit - 192914GS:Briggs and Stratton 360 View
Chemical Injection Kit - 192914GS:Briggs and StrattonChemical Injection Kit - 192914GS:Briggs and StrattonChemical Injection Kit - 192914GS:Briggs and StrattonChemical Injection Kit - 192914GS:Briggs and Stratton 360 ViewChemical Injection Kit - 192914GS:Briggs and Stratton

Chemical Injection Kit 192914GS

Part Number: 192914GS
Briggs and StrattonTroy-BiltCraftsmanSnapper
Availability: In Stock
Price: $27.30
Ships within 1 business day

*This part replaces obsolete part #: 115-87628P and 231B2327GS.

Product Information
Description:
It is a high-quality item that is supplied by the original equipment for use with Briggs and Stratton, Troy-Bilt and Snapper pressure washers. The kit includes a fitting that allows a user to connect the hose that supplies the chemical cleaning solution. Unfortunately, over time components on your equipment may wear out or get damaged eventually requiring a replacement. Make sure to check the appropriate diagrams and the owners manual of your model for the correct installation of these parts. The kit includes one durable brass fittings, a metal ball, a spring and a rubber seal. To replace it, you will need a wrench set to remove the old fitting and secure the new one.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Troy-Bilt
Briggs and Stratton
Craftsman
Snapper
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Pressure Washer

Questions & Answers for Chemical Injection Kit


In what order do the spring, ball, and seat go into brass fitting?
George asked on 2022-10-31
Hello George, Thank you for the question. The parts are installed with the brass fitting then the Rubber Seal, Metal Ball and then the Spring. We hope this helps, good luck with this repair!
eReplacementParts Team October 31, 2022
Repair Instructions: Submitted by Customers Like You
8 of 11 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Expert
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Failure of pressure washer to take up chemical cleaner from plastic chemical bottle
This was for a Troy Built (Briggs & Stratton) 2700 psi pressure washer. The repair would seem simple. We ordered the Chemical Injection Kit "E" part # 192914GS - basically a brass fitting with o-ring, spring and ball bearing that fits into the main unit. A hose is attached to the brass fitting leading to the chemical bottle - where we also replaced the rubber/plastic cutoff valve.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, 10 mm wrench
It wouldn't dispense the soap
I used a 10 mm wrench to take the brass fitting off and inserted the 0-ring, spring, and steel ball into the housing. Replaced the fitting and insert the feed tube onto the fitting. I started the machine and put the low pressure nozzle on the wand and presto. The soap now dispenses. Great customer service to you guys. Thanks for telling me the truth about what to do to make my machine work again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set
Soap despenser not working and had to order the valve set.
Removed the soap valve and found it compacted with soap. Had to dig it all out then replace the spring and ball bearing. Works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Adjustable Wrench, none
Wouldn't dispense cleaning solution
I replaced the spring and ball in the dispenser line.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Could not apply detergent
Removed injector
Cut off plastic tube
Screwed on new injector
Pushed tube on injector
Put tube in detergent container
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Would not pump detergent.
Removed the old suction valve and installed the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Spring was lost
Replaced kit
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Would not pump soap
Replaced spring, ball bearing,o-ring and fitting. Works great now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Kit, Chem Hose & Filter - 192796GS
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
would not dispence detergent
Removed the detergent dispense nozzle and replaced spring, o-ring, and ball.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Chemical Injection Kit - 192914GS
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Open end wrench
Plugged chemical injection inlet
Screw out the old fitting , screw in the new one, very simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.9
Average Rating (out of 5):
15 Reviews
Click to filter by ratings:
5 stars
14
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Easy Repair
    I have ordered from you before but it's been years, I think. As with the last time I ordered and this time, both parts have arrived incredibly fast. The part was as described and fit according to your website. The instructions provided with the part were accurate and easy to follow. The only recommendation I would provide is with threaded components, use teflon (sp?) tape if available. Overall, great company that provides parts that actually fit the recipient part and if I needed assistance with the correct part, as I did the previous order to this one, your company actually provided a live, air breathing human being! Will absolutely order from you again!
    Jeffrey - July 26, 2023 Verified Purchase
    Great product and quick delivery
    Thank you for such great service.
    Guest - November 18, 2022 Verified Purchase
    It was a easy repair.
    Is piece was for my power washer it arrived on time.
    Guest - May 31, 2022 Verified Purchase
    Quick delivery of the right part
    Website made it fairly easy to find the correct part. Easy ordering and quick delivery. Only negative is an email request later for some helpful info was never answered.
    Guest - July 13, 2021 Verified Purchase
    Original Manufacture Part
    This was my third purchase of a replacement part from “ereplacementparts.com”, and they had the parts that I needed. From their online references material I was able to identify the part that I needed and the payment, checkout process was quick and easy. I had multiple options too choose from for shipping, and the part arrived on the day expected.
    William - November 5, 2020 Verified Purchase
    Easy repair
    Exact part I needed. Quick fix and fast shipping
    Guest - July 30, 2020 Verified Purchase
    The parts was exactly right
    It arrived quickly
    Guest - April 18, 2020 Verified Purchase
    Finding the Part
    The trail to identify the needed part was easy to follow. This confidence any anxiety.
    Guest - November 5, 2019 Verified Purchase
    Great Service, Friendly Knowledgeable People!
    The service was great the rep that took care of me was knowledgeable and very helpful. The part numbers were different because they had been changed by the manufacturer. The new part fit exactly as did the old one and worked just fine. Service was fast and I received it very fast. I highly recommend these folks. My garage door opener has a new life thanks to them.
    Guest - June 25, 2019 Verified Purchase
    Spot on
    Fast shipping, great price, had the part when no one else did. Highly recommend
    Guest - June 4, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal