This OEM Poulan Chainsaw Bar Adjustment Kit is used to adjust the tension of the bar to keep the cutting chain tight for proper operation. It includes Retainer Ring, Pin and the Adjustment Bolt. Chainsaw chains stretch during normal operation and begin to sag on a saw's guide bar. If a chainsaw chain is allowed to become too loose, it can easily come off the bar during operation and serious injury or damage can occur.
Bar Adjustment Kit 576752301
OEM part for: Poulan
Part Number: 576752301
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Poulan
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Bar Adjustment Kit
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Part was missing from chain saw
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, 1/2 inch socket & 3/8 ratchet
Parts Used
Broken bar adjustment pin
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Chain bar adjustment nut broke
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers
Parts Used
2) Make sure cog is facing up towards top of saw- diagram looks like cog is on bottom (can be fixed after, but have to semi-remove adjust screw by tilting out and up and slide out of back retainer at screw end...)
The chain drive sprocket had broken teeth and the whole drum assembly needed to be replaced. Also, while I had the saw apart, I decided to install a new filter, and a new chain tensioner.
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Piston stop
Bar adjust screw was bent and obsolete.
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Dropped it from a tree. Chain adjustment parts were broken from the impact.
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Removed the bar and chain
Removed the existing 3 adjustment parts
Replaced the parts from kit
Replaced the bar and chain
Adjusted the chain
Attached the clutch cover
Started and tested the saw
No problems
nothing
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
adjuster striped
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, pick
Parts Used
chainsaw got damage by inproper use.
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Bar adjustment screw was bent.
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Then I put on the new clutch cover, using two 8mm x 1.5 flange nuts, adjusted the chain using a screwdriver, and tightened the two flange nuts with a 13mm socket. DONE!!!!!
Works great, better then new. Why do you think the best saws don't have "tool less" bar adjusters? ( Hint ) Because it is junk.
P.S. Website says clutch cover does not come with bar adjuster, but mine did.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.