Kickstand W/screws W13110050028
Part Number: W13110050028
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
Product Information
Specifications
|
Description:
| This is an authentic Razor replacement part, sourced from the original manufacturer for use with electric scooters. The kickstand is a complete part assembly that is used to keep the scooter upright when not in use. This kickstand is available as an individual replacement part, please see model diagram for associative parts. |
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Scooter
Questions & Answers for Kickstand W/screws
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Scooter
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
The kickstand spring broke and the kickstand hung down while riding
Removed foot plate screws (6). The back two had lock nuts so I had to have wrench to hold the Nut in place. Removed foot plate. Removed kickstand. The screw had a lock but so I needed another wrench. Installed new kickstand. Reinstalled foot plate. My grandson helped
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Scooter
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
The kickstand return spring was lost.
To replace the kickstand assembly we had to remove the top of the scooter to gain access to the lock nut on the back of the retaining bolt. After we got the retaining bolt and lock nut off it was just a matter of reversing the order to install the new kickstand assembly, re-install the top plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Scooter
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Allen wrench
Installed Razor E100 Kickstand
1. Removed old unused kickstand bolt.
2. Put kickstand on mounting lug.
3. Installed new bolt and locking nut.
4. Held the nut in place with an open end wrench and tightened the bolt with a hex key.
Extremely simple to install.
2. Put kickstand on mounting lug.
3. Installed new bolt and locking nut.
4. Held the nut in place with an open end wrench and tightened the bolt with a hex key.
Extremely simple to install.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
