Easy
15-30 minutes
This is an authentic manufacturer sourced replacement part used on Dewalt compound miter saws. Kerf boards (also called kerf plates) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong kerf board for your tool can give a rough edge to the material you’re cutting. This part is made out of plastic and it is sold individually. Screws that attach this part are sold separately.
Kerf Board 618199-00
OEM part for: DeWALT
Part Number: 618199-00
$6.82
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 11 machines
DeWALT
DW718 Type 1 Miter Saw View Diagrams & Manuals
DW718 Type 2 Miter Saw View Diagrams & Manuals
DW718 Type 3 Miter Saw View Diagrams & Manuals
DW718-AR (Type 1) Mitre Saw Power Tool View Diagrams & Manuals
DW718-AR (Type 2) Mitre Saw Power Tool View Diagrams & Manuals
DW718-AR (Type 3) Mitre Saw Power Tool View Diagrams & Manuals
DW718-AR (Type 4) Mitre Saw Power Tool View Diagrams & Manuals
DW718-B2 (Type 1) Mitre Saw Power Tool View Diagrams & Manuals
DW718-B2 (Type 2) Mitre Saw Power Tool View Diagrams & Manuals
DW718-B2 (Type 3) Mitre Saw Power Tool View Diagrams & Manuals
DW718-B2 (Type 4) Mitre Saw Power Tool View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Miter Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
2
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great fit
These are perfect.
Guest -
September 13, 2019
Verified Purchase
Ordered the incorrect size. Spoke with customer service. They ordered correct size. Perfect fit.
Great customer service
Guest -
June 20, 2019
Verified Purchase
Replacement
Fit and finish were perfect.
Noticed an old address when I printed receipt and had to call. They were so helpful and very polite.
Mat -
April 18, 2019
Verified Purchase
The right part the first time,
I was very pleased to see the correct part come but was a little disappointed in the shipping cost and speed.
Which I did know right up front. And I guess with gas prices going up almost hourly I guess I have to live with it. Five stars if not for that.
Guest -
June 23, 2022
Verified Purchase
Easy replacement - order TWO
Ordering was easy and item shipped quickly. Seems like the part should be sold in pairs. I thought I was ordering two FULL board (one spare) but really received two halves that form one full throat plate. I should have checked the image more carefully. Good product, otherwise.
Guest -
August 18, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Kerf Board
What is the length of the plastic running board
Do you have a Dw708 handle casing component the plastic railing
for model number Dw708 Type3 ser.296986
asked on 2023-03-29
Hello, Thank you for your inquiry. We show that these kerf plates are approximately 12 inches in length. Sadly, we do not show a handle casing rail listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact us back to see if it is something we carry. We hope this helps.
eReplacementParts Team March 29, 2023
12 inch blade, will this fit?
Billy
for model number DW708
asked on 2023-02-10
Hello Billy, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 395672-00. Thank you for the inquiry, good luck with the repair!
eReplacementParts Team February 10, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Kerf boards got damaged
Mark - January 1, 2016
👍 3 of 4 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
TURN OFF THE POWER! Unscrew and replace kerf boards, easy. Check to make sure it clears the saw blade. Check twice!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bearing went bad on Dewalt chop saw
Jason - February 19, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Chop Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Snap Ring Pliers
Removed drive belt cover
Removed drive belt
Removed motor cover with armature
Removed armature from housing
Used bearing separator and press to remove drive pulley, then damaged bearing.
Inner race of bearing was very tight so we thinned it with a carbide burr and broke it off the shaft
Retaining screw for drive pulley was installed with Loctite, had to heat to soften Loctite and remove.
Only the large bearing was bad but I replaced both while apart
Reassembled in reverse order.
Helpful to have some experience
Removed drive belt
Removed motor cover with armature
Removed armature from housing
Used bearing separator and press to remove drive pulley, then damaged bearing.
Inner race of bearing was very tight so we thinned it with a carbide burr and broke it off the shaft
Retaining screw for drive pulley was installed with Loctite, had to heat to soften Loctite and remove.
Only the large bearing was bad but I replaced both while apart
Reassembled in reverse order.
Helpful to have some experience
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Older DeWalt miter saw with worn and cut dust shoot, torn dust bag, and enlarged kerf board. These parts are difficult to find, even on sites like Etsy.
Gregory - April 10, 2024
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Disassembled and removed old parts. The kerf board fit great. I had to make sure the saw was cutting exactly at 90 degrees so I dialed it in before making the cut in the new plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced broken kerf plates.
Steven - August 7, 2020
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed broken plates, then installed the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wear plate was broken, Kerf boards were worn.
Joseph - August 10, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Torks driver set
Parts Used
Removed fence, removed Kerf boards, removed pivot bolt nut, lifted saw from base, removed old wear plate, properly placed new wear plate, aligned saw back to base, lightly snugged pivot bolt nut, checked miter base rotation ( pivot bolt nut too tight base will not rotate, too loose and saw will wobble on base, cuts won't be accurate) replace new kerf boards, reattach fence, oh and for the ones that need to be told....always unplug the saw before you work on it!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
