Discussion for the Jet 16-32 Plus (629004K) Sander
Post a Comment
Ask a question, answer a question, or post a comment!
Question: Performax 16/32 Plus
I have a older sander Model #629002. Wondering if this part would work on my unit.
Reply: Performax 16/32 Plus
If we could get a serial number on your machine. We should be able get the correct part number for you. And if you could make sure it says 16/32 Plus on it. That will help to.
Question: Troubleshooting Conveyor Control...
When I turn on the conveyor controller switch...the motor makes no sound, there is no light, the belt does not move. When last used a month ago, it worked. The drum motor works fine.
How can I determine if this is a controller failure, before ordering that expensive part?
Reply: Troubleshooting Conveyor Control...
There is no test for controllers. You have to bypass the controller and test the motor. Problems like that are generally the fault of the controller but check the motor out first to make sure. Hope that helps.Good luck.
Question: Sandsmart Controller - ( 72-2250...
doesn't always switch on, have to turn back and forth than switch seems to catch on. is there a fix?
Reply: Sandsmart Controller - ( 72-2250...
I don't know of any internal parts to repair this part. You might try an electronics repair facility in your area, before you purchase a new one.
I would like to use this swith on a wds1632 can I see the back side? thamks
We don't have another image of the 994534 On/Off switch. But it does have four terminals on the back of it. If you need another information let us know.
Reply: Ryobi Wds1600
Even though they look similar, the two machines do not have any parts that can be used on the other.
Question: Performax 16-32 Compatability
I have an old Performax 16-32 sander that I inheritated from my father. I turned it on today and the drum would not spin. Upon inspection I saw that the drum shaft coupling was broken and another piece (spider I believe) was broken as well. I have a model # 629G01. Will the parts for a Jet (629004K) work on my machine? If not can you advise me where to find parts for my sander. Thanks
looking for the part number for the belt on the 16-32 drum sander. the large belt on the bed?
The item you are looking for is the conveyor belt. Here is a link to the part number.Jet 16-32 conveyor belt.
Hope this helps,
Question: Conveyor For Jet/Performax 16-32...
I have a Jet 16-32 Plus with a model # [on the plate] E171548, and Serial K015104. Date of manufacture on the plate is 2001/09. I need a new conveyor and need to determine the correct part number. The old part number is obsolete and the new part number appears to be 60-0316P. Is this the correct part for my machine. :confused::confused: