Product Information
Description:
This is a genuine Homelite replacement part that has been sourced from the original manufacturer to be used with chainsaws. The special gasket is used to seal the connection between the carburetor insulator and the cylinder assembly. It is recommended to replace gaskets when servicing the chainsaw to ensure proper seals when the parts are reassembled. This gasket is available as an individual replacement part. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 12 compatible machines
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
Questions & Answers for Intake Gasket
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Torx bits, needle nose pliers
heat dam cracked
1. Remove outer cover to expose spark plug and carburetor assembly
2. Remove spark plug and air filter
3. Remove gas line's and choke lever
4. Remove two torx bolts then air filter assembly
5. Lift carburetor up slightly and remove throttle linkage
6. Then carb. and heat dam
4. Be careful and remove one piece at a time so you can see how they all fit together
2. Remove spark plug and air filter
3. Remove gas line's and choke lever
4. Remove two torx bolts then air filter assembly
5. Lift carburetor up slightly and remove throttle linkage
6. Then carb. and heat dam
4. Be careful and remove one piece at a time so you can see how they all fit together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information