Genuine OEM replacement part, this item is sold individually.
The purpose of the 901551001 Intake Gasket is to create a seal between the Heat Dam and the cylinder head.
Over time because of the heat it is exposed to this gasket will deteriorate and will have to be replaced.
Intake Gasket 901551001
OEM part for: Homelite, Ryobi
Part Number: 901551001
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 91 machines
Ryobi
Homelite
This item works with the following types of products:
- Hedge Trimmer Parts
- Trimmer Parts
- Blower Parts
- Edger Parts
- Cultivator Parts
- Vacuum Parts
- Pruner Parts
Repair Videos ?
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Intake Gasket
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Engine only ran with choke on.
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Star screwdriver set
The blower wouldnt stay running, just a few seconds
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Special Carb jet adjustment tool
Removed carburetor with a socket
Removed gas lines and throttle cable
Removed old intake gasket
Reassembled carburetor with new gasket
Replaced the fuel filter inside the tank
Primed the carb. Set the choke and throttle to full open
2 pulls it sputtered, 3rd pull it started
It ran fine barely had to tweak the jets
Very happy with results
No start
Tool Type
Blower
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver, Torx driver
Main Jet of carburetor stopped up.
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Nutdriver, Toxo Sockets, MM Sockets, Plastic Hammer
Start and shut down.
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
My trimmer would not start,I had it for for nine yrs,and did not want to buy a new one, the carburetor diaphragm was no good
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Wrench Set
Engine dies when choke is opened
Tool Type
Hedge Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Star drivers
Homelite blower Carburetor heat dam broke
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx driver
Heat dam broken
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Nutdriver, Torx driver
2. Removed fuel hose from carb
3. Removed filter cover and nuts that held filter to base stud
4. Removed carb from studs with intake gasket removed screws, removed heat dam and dam gasket
5. Reversed to install new dam gasket. heat dam carb studs and screws
6. Install carb .and gasket. filter housing.filterand filter cover
7. Put fuel lines in place on carb .primed and started. job completed
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.