Product Information
Description:
The inlet valve seat goes between the valve seat to head gasket and the exhaust valve seat gasket. It is available as an individual replacement. This genuine item is supplied by the original equipment manufacturer for use with Makita compressors. An adjustable wrench may be necessary during the installation of this part. It is made of metal and will need to be replaced if it becomes broken. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Compressor
Questions & Answers for Inlet Valve Seat
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Adjustable Wrench
Compressor had no pressure
Removed the compressor assembly from the frame to get shroud off.
Removed the air pipe from the head.
Removed the head.
Removed the worn valve seat
Installed the new valve seat
Then reassembled in reverse order
Removed the air pipe from the head.
Removed the head.
Removed the worn valve seat
Installed the new valve seat
Then reassembled in reverse order
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information