Easy
15-30 minutes
This ignitor in a heater, also referred to as a spark ignitor, is a genuine OEM replacement part designed for heaters. It is responsible for the ignition of the fuel-air mixture. If you are having difficulties starting the heater, noting low power output, or experiencing misfires, the ignitor will need to be replaced if the spark plug is functional. The ignitor can fail due to wear and tear over time, causing it to crack or break or it may experience electrical failure. First, ensure the heater is switched off. Remove the equipment housing and locate the faulty ignitor. Disconnect the cables and primary plug and gently pull out the ignitor and replace it with the new ignitor. Reconnect the cables and plug and reattach the equipment housing. Note that this ignitor may need a plug adapter, part number: 70-037-5000.
Ignitor 70-037-0350
OEM part for: Pro Temp, Sun-Stream, Heat Stream, Heat Hog, Master
Part Number: 70-037-0350
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- New version. May need Plug Adapter.
- Plug Adapter Part Number: 70-037-5000
- Classification: Part
- Weight: 0.64 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 23 machines
Sun-Stream
Pro Temp
Heat Stream
Heat Hog
Master
This item works with the following types of products:
- Heater Parts
This part replaces obsolete part #: 75-025-0100, 70-037-0300, 75-025-0120, 75-025-0200
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Ignitor
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Would not ignite.
Tool Type
Heater
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
Heater wouldn't fire
Tool Type
Heater
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
2 Unplugged ignitor and removed
3 Installed new ignitor
4 Replaced motor and cover
Ignitor not producing high voltage
Tool Type
Heater
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
2 Unplug and remove old ignitor
3 Install new ignitor
4 Plug in high voltage cables
5 Plug in primary plug into circuit board
6 Install screws and tighten chassis
bad Spark plug and Igniter
Tool Type
Heater
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver
To get to the Igniter I had to take out 6 screws from the Heater Housing and lift up to slide out the Igniter and unplug it. I then replaced it with the new one and put everything back together. And now it works just Like a new one.
The heater was pumping fuel but would not ignite. Tried 3 times and figured it had to be one of the parts or all three.
Tool Type
Heater
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
