This is manufacturer approved replacement part designed for use with air compressors. This is the hose that delivers fuel from the tank to the engine. It is made out of rubber and it is sold individually. Please note fuel filter and hose clamp are sold separately.
Hose A16223
OEM part for: Porter Cable, DeWALT
Part Number: A16223
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 21 machines
Porter Cable
DeWALT
This item works with the following types of products:
- Compressor Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hose
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Hose split causing a air leak
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Parts Used
Hose had a hole in it from compressor to tank
Tool Type
Compressor
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Torque driver, tile snips
Parts Used
2. Cut off old clamps
3. Removed old hose
4. Placed new clamps on hose
5. Attached hose to proper locations
6. Used tile snips to tighten clamps
7. Put the cover back on
Replace hose
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Cooling fan blades, all of them, broke off
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Rubber hammer, slotted screw driver
Parts Used
Took fan off
Put new fan on
Air hose from compressor to tank brake at the check valve
Tool Type
Compressor
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Nutdriver, Knife
Parts Used
Hose leaked air
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
No problems
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Adjustable Wrench, End cutter pliers
Leaking air
Tool Type
Compressor
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
2. Attached new hose to motor and cylinder head
3. Put case back together
4. Attached hose to tank and regulator
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.