*This part replaces obsolete part #: 5140026-38 and 5130078-00.
Product Information
Description:
It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT air compressors. This is an identical replacement for a worn or a missing gasket that is utilized to provide an air-tight seal for the valve plate, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is a high-quality component which is made of durable composite material and is sold individually. |
Frequently Purchased With
Compatibility
the 21 compatible machines
This part is compatible with the following machines:
DeWALT
D55155 Type 1 Compressor
D55150 Type 1 Compressor
D55152 Type 1 Compressor
D55153 Type 1 Compressor
D55153 Type 2 Compressor
D55153 Type 3 Compressor
D55154 Type 1 Compressor
D55250 Type 1 Compressor
D55250 Type 2 Compressor
D55251 Type 1 Compressor
D55152 Type 2 1.1HP Compressor
D55150 Type 1 Compressor
D55152 Type 1 Compressor
D55153 Type 1 Compressor
D55153 Type 2 Compressor
D55153 Type 3 Compressor
D55154 Type 1 Compressor
D55250 Type 1 Compressor
D55250 Type 2 Compressor
D55251 Type 1 Compressor
D55152 Type 2 1.1HP Compressor
AM134 Compressor
AM390 Compressor
AM782HC4V Type 1 Compressor
AM782HC4V Type 2 Compressor
D55155 Type 2 1.2HP Compressor
D55153 (Type 4) Compressor Power Tool
D55153 (Type 6) Compressor Power Tool
D55153 (Type 7) Compressor Power Tool
D55154 (Type 2) Compressor Power Tool
D55154 (Type 3) Compressor Power Tool
AM390 Compressor
AM782HC4V Type 1 Compressor
AM782HC4V Type 2 Compressor
D55155 Type 2 1.2HP Compressor
D55153 (Type 4) Compressor Power Tool
D55153 (Type 6) Compressor Power Tool
D55153 (Type 7) Compressor Power Tool
D55154 (Type 2) Compressor Power Tool
D55154 (Type 3) Compressor Power Tool
Products Compatibility
This item works with the following types of products:
- • Compressor
Questions & Answers for Gasket
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Compressor wouldn't go above 50psi
Removed the shroud, removed 4 head bolts, modified the gasket because the bolt hole circle wasn't big enough, and put it back together. I knew it was the wrong one when I ordered it but for 7 dollars, it was worth a chance and it worked. I appreciate the 1" grid in the picture of the part. Three inches is what I needed and yours was 2 7/8 or so. Everything fit after I cut the bolt holes farther from center. Great job, great price and if the gasket blows again, I will be back.
Thank you...
Thank you...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
My Dewalt compressor would only reach 65 psi
Removed cylinder head and discovered head gasket torn in the middle. Installed a new gasket set for valve plate to correct operation
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
Compressor would not pump up to normal pressure
Pulled head off of compressor, inspected reed valves. One was broken. Replaced both valves and gaskets. Re assembled and tested.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information