This replacement handle set is specially designed for use with Dewalt compound miter saws. It is a genuine part that is supplied directly from original equipment manufacturer. This plastic handle is used to safely operate the saw. Please note, the screws to secure this handle are sold separately. Replacing this handle you will need a screwdriver.
Handle Set 624730-00
OEM part for: DeWALT
Part Number: 624730-00
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 31 machines
DeWALT
This item works with the following types of products:
- Miter Saw Parts
- Saw Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Handle Set
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Upgraded to my dws779 to the dws780 light system
Tool Type
Miter Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill
Saw operation was very loud, and it was difficult to turn the blade when the machine was off.
Tool Type
Miter Saw
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Torx wrenches, pulley/gear puller
Loosen the motor and belt tensioner and remove the belt.
Remove the motor using the 4 outside bolts not the six inside bolts.
Pull the winding assembly out
Using. pulley or gear puller, remove the belt pulley and large bearing. Note that there is about 1/16 inch clearance between the large bearing and the cooling fan.
Wire brush axle and install new bearing using a deep well socket or pipe that meets the bearing at the inner bushing. Hitting the bearing from the outside can damage it
Replace the pulley.
Repeat process for small bearing and reassemble the motor being careful not to damage the brushes when you reseat the winding assembly.
Broken handle
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Remove the screws from the top handle
Remove the switch from the handle
Remove the bottom half of the handle
Reverse order to assemble
Handle and side cover cracked
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill
Parts Used
Handle set was broken.
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
cracked handel
Tool Type
Miter Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Added light to 779 DeWalt miter saw
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill, Wire stripper plus connectors
It was an upgrade
Tool Type
Miter Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver, Wire stripper
Installed work light and work light wiring channel.
Clipped end connector from power supply leads and stripped back wires.
Stopped back original wires in handle set.
Attached power supply wires and taped the connections.
Installed the new handle set and power supply.
Added LED light to my DWS 779 to make it into a DWS 780
Tool Type
Miter Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Nutdriver, Allen wrench
The easy to follow online videos gave great instruction.
I thought I was ordering only the top half of the handle for $13. Surprised to get top and bottom.
Did not need to change the bottom part, so left wires in place.
Only remotely difficult part was splicing the power supply leads into the existing saw power leads (black wire to black, white to white). Did not cut the main power leads, but just cut through the insulation and slid apart 1/8" to solder in the smaller power supply wires. Watched several videos before cutting and it went well.
Not too impressed with the final LED light. Not nearly as easy to use as my Porter Cable red laser lights on both sides of the blade. But, better than no light at all.
eReplacement was really easy to work with and they had all the parts and instructions to make this conversion easy to do.
Handle was broken and side cover was cracked.
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.