Handle Half, Right 577908201
Part Number: 577908201
Order within the next 11 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 537230601.
Product Information
Description:
This is an authentic Husqvarna replacement part manufactured for use with chainsaws. The plastic handle shell is half of the handle set that contains the throttle trigger, and trigger lock. The handle halves are available separately, this right hand half of the handle is sold individually. Recommended parts: • Cap, Handle Left, part number: 537230704 |
Frequently Purchased With
Compatibility
the 26 compatible machines
This part is compatible with the following machines:
Husqvarna
455 E (2007-01) Chainsaw
455 E (2007-01) Chainsaw
455 E (2006-06) Chainsaw
455 E (2006-06) Chainsaw
455 (2004-10) Chainsaw
455 (2004-10) Chainsaw
455 (2005-01) Chainsaw
455 (2005-01) Chainsaw
455 (2005-03) Chainsaw
455 (2005-03) Chainsaw
455 Rancher (2006-02) Chainsaw
455 Rancher (2006-02) Chainsaw
455 (2006-06) Chainsaw
455 E (2007-01) Chainsaw
455 E (2006-06) Chainsaw
455 E (2006-06) Chainsaw
455 (2004-10) Chainsaw
455 (2004-10) Chainsaw
455 (2005-01) Chainsaw
455 (2005-01) Chainsaw
455 (2005-03) Chainsaw
455 (2005-03) Chainsaw
455 Rancher (2006-02) Chainsaw
455 Rancher (2006-02) Chainsaw
455 (2006-06) Chainsaw
455 (2006-06) Chainsaw
455 (2007-01) Chainsaw
455 (2007-01) Chainsaw
460 (2005-03) Chainsaw
460 (2005-03) Chainsaw
460 (2006-02) Chainsaw
460 (2006-02) Chainsaw
460 (2006-06) Chainsaw
460 (2006-06) Chainsaw
460 (2007-01) Chainsaw
460 (2007-01) Chainsaw
460 (2011-01) Rancher Chainsaw
460 (2011-01) Rancher Chainsaw
455 (2007-01) Chainsaw
455 (2007-01) Chainsaw
460 (2005-03) Chainsaw
460 (2005-03) Chainsaw
460 (2006-02) Chainsaw
460 (2006-02) Chainsaw
460 (2006-06) Chainsaw
460 (2006-06) Chainsaw
460 (2007-01) Chainsaw
460 (2007-01) Chainsaw
460 (2011-01) Rancher Chainsaw
460 (2011-01) Rancher Chainsaw
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
Questions & Answers for Handle Half, Right
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Allen wrench set
The plastic handle when a log hit it
Removed allen head bolts that connected the handles to the main saw, and had to remove two more bolts after handle assembly was off saw to remove top, then reassembled. The replacement parts fit great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Saw got caught under log and broke parts
1. Got tools together
2. Removed cutting bar and chain
3. Removed handle left
4. Removed handle right & front handle assembly
5. Cleaned up saw
6. Put new handle right & front handle together used orginal screws, rubber absorbers and springs and installed.
7. Installed handle left with orginal screws & trigger assembly
8. Made sure all parts was in place and test run saw
9. Installed cutting bar and chain test ran again
10. Started cutting trees
2. Removed cutting bar and chain
3. Removed handle left
4. Removed handle right & front handle assembly
5. Cleaned up saw
6. Put new handle right & front handle together used orginal screws, rubber absorbers and springs and installed.
7. Installed handle left with orginal screws & trigger assembly
8. Made sure all parts was in place and test run saw
9. Installed cutting bar and chain test ran again
10. Started cutting trees
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, allen wrench
it fell off of a roof and broke several parts
I disassembled the chain cover, chain. top cover, handle, carb linkage, and reassembled it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Nothing
Removed broken parts then replaced with new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Nutdriver, Allen keys
The handle was broken along with the throttle mehanism
Removed the old handle half that was left and the right side that is attached to the upper handle . Removed the torsion mount springs and the air filter housing . Transferred all the necessary parts then installed the new right half with the upper handle and then the throttle lock and trigger with the return spring which was slightly confusing when the old parts were missing so I used the parts breakdown from e replacement for the placement and finished assembling the rest and the repair was successful thank you, all the part were right the first time around
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect fit
I ordered this handle and some other parts for my saw. The YouTube video made the installation much easier and I highly recommend watching it as you go through the steps
Guest -
April 28, 2022
Verified Purchase
Handle repair
The parts arrived in a timely fashion and were exactly as ordered they were easy to install and fit perfectly. I would order other parts from you Thanks!
Guest -
May 27, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1