Easy
15-30 minutes
This is an authentic replacement part sourced from original manufacturer. It is designed for use with Ryobi table saw. This is the hand wheel that allows you to adjust height/bevel of the table saw. It is made out of metal and it is sold individually. Please note the hand wheel cap/cover is sold separately.
To complete this repair you would need a screwdriver and pliers.
Hand Wheel 089037007041
OEM part for: Ryobi, Ridgid
Part Number: 089037007041
$5.19
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 5 machines
Ryobi
RTS10 10" Table Saw View Diagrams & Manuals
RTS10G 10-Inch Table Saw View Diagrams & Manuals
RTS10NS 10-Inch Table Saw View Diagrams & Manuals
Ridgid
RTS10G 10 In. Tile Saw 3-8-17 (Rev:04) View Diagrams & Manuals
RTS10 10-Inch Tile Saw View Diagrams & Manuals
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
11
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
easy repair
great service. 15 minute repair. Thank you eReplacementParts.
Guest -
May 16, 2023
Verified Purchase
A real pleasure to get the exact part to fix my device.
First time to order from you and completely satisfied.
iGlobal -
April 30, 2023
Verified Purchase
Always perfect service couldn't be better thanks
Always perfect service amazing
Guest -
February 28, 2023
Verified Purchase
Easy to put on. Shipped fast
Part fit perfect on my table saw. Just like nee
James -
February 1, 2023
Verified Purchase
easy repair was as described
was as discribed works great thanks quick shipping
Guest -
June 24, 2021
Verified Purchase
very good
Work as needed
Guest -
June 8, 2021
Verified Purchase
Great!
Quick delivery!
Guest -
January 4, 2021
Verified Purchase
perfect
wow could not believe I found the part at a great price
Guest -
March 30, 2020
Verified Purchase
Very easy shopping experience
Exact replacement
Mike -
September 23, 2019
Verified Purchase
Excellent replacement for the original handle
This replacement handle fit the old blue Ryobi RTS100 perfectly. It was very hard to remove the old handle because someone had superglued it on and some of the glue got in the hole where the drift pin attaches it to the shaft. Be aware you will need to remove the drift pin carefully and reuse it or buy a new pin as it does not come with the new handle.
Susan -
May 22, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hand Wheel
Does it come with the rod that goes through the nob
Richard
for model number RTS10G
asked on 2022-11-11
Hello Richard, Thank you for the question. The Rod Part Number: 089037007042 is sold separate from the Knob. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team November 11, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Hand wheel broke off at screw shaft
Steve - December 30, 2015
👍 7 of 7 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Use a punch to remove the roll pin connecting the hand wheel to the shaft, remove broken hand wheel. Line up hole in the new hand wheel to the hole in the shaft, and tap in roll pin. Remove hand wheel knob from old hand wheel and install on the new hand wheel. Install hand wheel cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken blade raising assembly
Michael - February 11, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, center punch
Remove the old handle pin from the spindle with a center punch. Install the new handle with the center punch and pin. Then install the turning wheel onto the handle with the long screw and washer nut. Snap in the cover and you are done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
A friend gave me a used table saw that was missing a hand wheel and wrenches
Michelle - October 10, 2023
Tool Type
Table Saw
Difficulty
Easy
Time
1-2 hours
Tools Used
Power Drill
The most difficult thing was removing the pin from the shaft that was holding the previous broken off hand wheel. I ended up having to drill through the pin until the pin finally came out. Once the pin was removed, it was fairly easy to add the new hand wheel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle was broken
Catherine - May 16, 2023
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Adjustable Wrench
Removed the old part, screwed in the new part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade height control handle was broken
Kenneth - December 15, 2022
Tool Type
Table Saw
Difficulty
Hard
Time
15-30 minutes
Tools Used
Pliers, Pin punch & hammer
Parts Used
Replaced handle with cotter pin couldn’t get a roll pin to replace original & too difficult anyway. Had trouble lining up the holes & to get the new handle. Glad I had a pin punch set. Was more difficult to get the original roll pin out because it is too close to back of handle & the structure around the handle to ouch it out originally
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wheel to raise the saw blade broke
Mike - September 25, 2019
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Punch
Parts Used
Punched out pin
Pulled off the broken wheel
Put on the new wheel
replaced pin
Done
Pulled off the broken wheel
Put on the new wheel
replaced pin
Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The hand wheel that raised and lowered the blade broke.
Spencer - April 12, 2019
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hammer and Pin Punch
Parts Used
Had to hammer out the pin connecting the hand wheel and simply swapped out the piece. Then, had to re insert the pin....easy peasy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I bought it on OfferUp and it was missing some stuff
Chris - April 24, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Adjustable Wrench
With patience and focus and the right tools
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The handle snapped off
Brennan - October 18, 2017
Tool Type
Table Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Spring rod punch
Parts Used
First I transferred the handle and up down cap to the new handle base. Next I punched the spring rod and old handle base off the table saw. Finally I secured the new handle by punching the spring rod through the new base and adjustment rod.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hand wheel held on with roll pin
Landon - August 23, 2017
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Power Drill, Dremel
Parts Used
Hardened roll pin used to hold on hand wheel
Could not press out with hand vice
Could not use punch to remove
Had to cut wheel off with Dremel
Cut roll pin off with Dremel
Drill out with diamond drill bit
Put hand wheel on and used a skinny screw and nut to hold wheel on
Could not press out with hand vice
Could not use punch to remove
Had to cut wheel off with Dremel
Cut roll pin off with Dremel
Drill out with diamond drill bit
Put hand wheel on and used a skinny screw and nut to hold wheel on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
