Grommet 886148
Part Number: 886148
Order within the next 11 hours
and your part ships today!
and your part ships today!
Product Information
Description:
| This is an original Porter Cable replacement part manufactured for use with nailers. The special grommet is used to seal the extra exhaust port on the cylinder cap. The grommet is held in place by a set screw, which is available separately. The grommet is sold individually. |
Frequently Purchased With
Compatibility
the 25 compatible machines
This part is compatible with the following machines:
Porter Cable
FC350 Type 1 Clipped Head Framing Nailer
FC350 Type 2 Clipped Head Framing Nailer
FC350 Type 3 Clipped Head Framing Nailer
COIL250 Type 1 2.5" Coil Nailer
COIL250 Type 2 2.5" Coil Nailer
COIL350 Type 1 3.5" Coil Nailer
COIL350 Type 2 3.5" Coil Nailer
DA250A 15 Gauge Angle Nailer
FC350A Type 1 Clipped Head Framing Nailer
FC350A Type 2 Clipped Head Framing Nailer
FCP350 Clipped Head Framing Nailer
FM350A Clipped Head Framing Nailer
FR350 Type 1 Round Head Framing Nailer
FC350 Type 2 Clipped Head Framing Nailer
FC350 Type 3 Clipped Head Framing Nailer
COIL250 Type 1 2.5" Coil Nailer
COIL250 Type 2 2.5" Coil Nailer
COIL350 Type 1 3.5" Coil Nailer
COIL350 Type 2 3.5" Coil Nailer
DA250A 15 Gauge Angle Nailer
FC350A Type 1 Clipped Head Framing Nailer
FC350A Type 2 Clipped Head Framing Nailer
FCP350 Clipped Head Framing Nailer
FM350A Clipped Head Framing Nailer
FR350 Type 1 Round Head Framing Nailer
FR350 Type 3 Round Head Framing Nailer
FR350A Round Head Framing Nailer
FR350MAG Type 1 Magnesium Round Head Framing Nailer
FR350MAG Type 2 Magnesium Round Head Framing Nailer
MS200 Type 1 16 Gauge Medium Crown Stapler
MS200 Type 2 16 Gauge Medium Crown Stapler
FR350 Type 2 Round Head Framer
FRP350 Type 1 3-1/2" Round Head Framer
DA250A (Type 1) 2 1/2in Angle Nailer Power Tool
FCP350 (Type 1) 3-1/2in Hp Ch Framer Power Tool
FM350A (Type 1) Framing Nailer Power Tool
FR350A (Type 1) 3-1/2in Rh Framer Power Tool
FR350A Round Head Framing Nailer
FR350MAG Type 1 Magnesium Round Head Framing Nailer
FR350MAG Type 2 Magnesium Round Head Framing Nailer
MS200 Type 1 16 Gauge Medium Crown Stapler
MS200 Type 2 16 Gauge Medium Crown Stapler
FR350 Type 2 Round Head Framer
FRP350 Type 1 3-1/2" Round Head Framer
DA250A (Type 1) 2 1/2in Angle Nailer Power Tool
FCP350 (Type 1) 3-1/2in Hp Ch Framer Power Tool
FM350A (Type 1) Framing Nailer Power Tool
FR350A (Type 1) 3-1/2in Rh Framer Power Tool
Products Compatibility
This item works with the following types of products:
- • Nailer
- • Stapler
Questions & Answers for Grommet
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Nutdriver
Lost grommet
Installed new grommet and tightened set screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Some loose parts fell off.
I just had to set the plug in place and install the set screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Power Drill, Allen wrench, some clean rags and a camera.
Would just leak air out of vent. Not trigger , just vent.
Clean surface, remove all 4x allen screws from back of nailer. There will be two internal setups. One for the spring and vent system and one for the plunger. The camera is to take a few snaps as you disassemble. This allows you yo clean all parts and insures. You put it back the same. I looked for anything out of ordinary and saw small crack on the parts I ordered
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
