Medium
30-60 minutes
It is a genuine item that is supplied directly from the original equipment manufacturer for Ridgid impact drivers. This part provides an identical replacement for a missing or damaged gear case assembly that was installed on a new tool, please make sure to check the appropriate diagrams of your model for the correct location and installation of this part. Keep in mind this high-quality component is made of durable metal and is sold individually.
Gear Case Assembly 200281052
OEM part for: Ridgid
Part Number: 200281052
$30.82
In Stock
Order within the next 3 hours and your part ships today! 
Compatibility
This part will fit the following 1 machine
Ridgid
R86034 X4 18V Lithium-Ion Impact Driver Kit View Diagrams & Manuals
This item works with the following types of products:
- Impact Driver Parts
This part replaces obsolete part #: 200281040
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gear Case Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Couldn't extract drill bit for tip
Jesse - December 21, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Impact Driver
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Pliers, Power Drill, Torx head bits Small size.
Parts Used
My repair was made very easy by using eReplacement Parts on line video and a Assembly. Diagram from on line using the maker,model number as search (google) item. I would like to mention that After searching around the I got a great price and free shipping***** five stars for some great phone help in ordering from e Replacement parts and also making sure that I got my order. I Will not hesitate using again.
THX
THX
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit stuck.
Robert - September 21, 2017
👍 3 of 4 people found this instruction helpful
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
1. Disassembled the drill.
2. Removed the gear case.
3. Installed the new one.
4. Reassembled the drill.
2. Removed the gear case.
3. Installed the new one.
4. Reassembled the drill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit broke off in the anvil
Stephanie - June 25, 2019
Tool Type
Impact Driver
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Snap ring pliers, torx bits
Parts Used
Remived the case screws & seperated the case.
lifted the motor and gear case assembly up out of the housing.
slid the gear case assembly off.
conpared the two parts side by side and discovered differences despite having the correct model number.
I further dismantled the gear cases removing the anvil and locking collar + washer & spring.
push the lock collar down (with a bit installed) to expose the c clip.
Remove the clip, and slowly remove the collar, spring, and washer being sure to note their order.
swap the new parts to the old case and reassemble. Be sure the c clip is locked in place fully - it will shoot off when you use the impact if not!
lifted the motor and gear case assembly up out of the housing.
slid the gear case assembly off.
conpared the two parts side by side and discovered differences despite having the correct model number.
I further dismantled the gear cases removing the anvil and locking collar + washer & spring.
push the lock collar down (with a bit installed) to expose the c clip.
Remove the clip, and slowly remove the collar, spring, and washer being sure to note their order.
swap the new parts to the old case and reassemble. Be sure the c clip is locked in place fully - it will shoot off when you use the impact if not!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit broke off
Dwayne - August 3, 2018
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed all screws and separated drill and disengaged drive assembly and replaced new housing and put back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I put a too short bit in and it stuck.
Sidney - November 29, 2017
Tool Type
Impact Driver
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the rubber end cover and then the clear plastic cover over the gear case assembly.
2. Removed the screws holding the driver sides together.
3. Separated the sides.
4. Removed the gear case assembly.
5. Reversed the above process and it worked like new.
2. Removed the screws holding the driver sides together.
3. Separated the sides.
4. Removed the gear case assembly.
5. Reversed the above process and it worked like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit stuck
James - November 27, 2016
Tool Type
Impact Driver
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx bits
Parts Used
Removed covers rubber and plastic , removed Torx screws and split the plastic housing, removed gear case and reassemble. Tested checks good
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
