Gasket 11061-1285

Description:

This replacement gasket is an authentic manufacturer sourced item that is specially designed for Kawasaki engines. This item provides an air tight seal for the rocker case, over time gaskets tend to deteriorate and get compresses eventually requiring replacement. One durable composite material gasket is sold individually, to replace it you will need a wrench.

Frequently Purchased With

Push Rod
$10.04

Gasket-head
$30.00

Muffler Gasket..
$4.99

Gasket,manifol..
$3.99

Oil Filter
$20.50

Oil Seal
$8.88

Gasket-carbure..
$3.99

Compatibility

This part is compatible with the following machines:

Kawasaki

Cub Cadet

FR600V-AS17 Engine
FR651V-DS05 Engine
FR691V-ES05 Engine
FR730V-DS05 Engine
FX730V-AS28 Engine
LTX1042KW (13WG91AS010, 13WG93AS010, 13AG93AS210, 13WG93) (2012) Tractor
LTX1042KW (13WG93AS010, 13AG93AS010) (2013) Tractor
LTX1042KW (13WG93AS010, 13WG93AS210, 13AG93AS010, 13AG93) (2014) Tractor
LTX1046KW (13WG91AT010, 13WG91AT056, 13AG91AT010) (2011) Tractor
LTX1046KW (13WF91AT010, 13WF93AT010, 13AF93AT210, 13WF93) (2012) Tractor
LTX1046KW (13WF93AT010, 13AF93AT010) (2013) Tractor
LTX1046KW (13WF93AT010, 13WF93AT210) (2014) Tractor
LTX1050KW (13AF91AP010, 13WF91AP010, 13RF91AP056) (2010 & Before) Tractor
LTX1050KW (13WF91AP010, 13WF91AP056, 13AF91AP010) (2011) Tractor
LTX1050KW (13WI91AP010, 13WI93AP010, 13AI93AP010) (2012) Tractor
LTX1050KW (13WI93AP010) (2013) Tractor
LTX1050KW (13WI93AP010, 13AI93AP010) (2014) Tractor
XT2-GX54 (14AHA3CA010, 14WHA3CA010) (2015) Fab Tractor
XT2-LX42 (13WGA1CS210) (2015) Kw Tractor Carb
XT2-LX42 (13AGA1CS010, 13WGA1CS010) (2015) Tractor
XT2-LX46 (13WIA4CN210) (2015) Fab Tractor Carb
XT2-LX46 (13AIA4CN010, 13WIA4CN010) (2015) Fab Tractor
XT2-LX46 (13WFA1CT210) (2015) Kw Tractor Carb
XT2-LX46 (13AFA1CT010, 13WFA1CT010) (2015) Tractor
XT2-LX50 (13AIA1CQ010, 13WIA1CQ010) (2015) Tractor
XT2-LX54 (13AIA4CA010, 13WIA4CA010) (2015) Fab Tractor
XT2-LX54 (13AIA1CW010) (2015) Tractor
RZT50 (17AI2ACP010, 17AI2ACP056, 17AI2ACP009, 17AI2A) (2009) Kawasaki 17AI2ACP
RZT50 (17AI2ACP010, 17AI2ACP056, 17WI2ACP010, 17WI2A) (2010) Kawasaki 17AI2ACP
RZT50 (17AI2ACP010) (2011) Kawasaki 17AI2ACP
RZT50 (17WI2ACP010, 17WI2ACP056) (2011) Kawasaki 17WI2ACP
RZT50KW (17AI2ACP056) (2012) Kawasaki 17AI2ACP
RZT50KW (17YI2ACP010, 17YI2ACP056) (2012) Kawasaki 17YI2ACP
RZT54 (17AI2ACK010, 17AI2ACK056, 17AI2ACK256) (2009) Kawasaki

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Engine

Repair Instructions: Submitted by Customers Like You

2 of 2 people found this instruction helpful

Tool Type:

Engine

Parts Used:

Gasket - 11061-1285

Push Rod - 13116-0725

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Socket set, Feeler gauge, 10mm socket, brake cleaner

Rocker arm bracket came loose, and ended up bending a push rod.

Clean up everything, lube up the push and install the new push rod, adjust the push rod gap, install new valve cover gasket.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Gasket - 11061-1285

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Head valve cover was leaking oil

Removed and cleaned the valve cover and installed a new gasket.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Gasket - 11061-1285

Gasket-carburetor/manifold - 11061-7092

Gasket,manifold - 11061-7093

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver

Kawasaki V twin engine surging, one cylinder not working.

Watched many you tube videos!!!
1. Inspected valves, and adjusted. was due 300 hour adjustment anyway.
2 .Determined a vacuum leak no fuel to #2 cyl. Only ran decent at full speed
3. After removing carb, and intake found no issues with gaskets.
4. Found the actual problem was carb-one welch plug of four was missing, put a piece of tape
over the hole engine smoothed out, and ran fine, Ordered welch plugs.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Gasket - 11061-1285

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Torque wrench

Leaking gaskets

Remove rocker covers, clean mating surfaces, install gaskets , replace covers and torque.
As usual all my e replacement parts are a perfect fit.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Air Filter Element - 11013-0752

Gasket - 11061-1285

Element-air Filter - 11013-7046

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Power Drill, Socket set, Wrench Set

Kawasaki FS730 V tune up at 200 hours

My lawnmower needed a complete tune-up including valve and carburetor adjustment. Pretty straightforward work with the exception of needing to remove a well plug to gain access to the idle air adjustment screw. Parts arrived a day early and were exactly as needed. A pleasant surprise considering the pandemic.

Suggest anyone tuning small gas engines include valve lash adjustment as it makes a HUGE difference in how a motor runs. Set carburetor mixture and idle speed last.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

O-ring - 670D2016

Gasket - 11061-1285

Oil Seal - 92049-7019

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Governor shaft seal leaking, replaced 1 valve cover gasket, replaced o ring on oil dipstick tube as prevention

1. Removed governor arm with wrench to loosen bolt
2. Spread arm with regular screw driver
3. Removed arm from shaft
4. With small but sturdy regular screw driver I slid it down governor shot into seal and prying carefully not to get anything but the seal.
5. Clean shaft and surrounding area with clean dry rag.
6. Using deep well socket tapped new seal in place
7. Replaced governor arm.
Did NOT have to remove intake, not in the way.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Gasket - 11061-1285

Push Rod - 13116-0725

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set, Feeler gage

Bent pushrod

Pull valve cover. Replaced rod. Adjusted valves. Replaced cover. Started engine.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

4 Reviews

Click to filter by ratings:

5 stars

3

4 stars

1

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Perfect fit

Arrived in timely fashion, no damage. Looks to be high quality.

Guest - May 24, 2022 Verified Purchase

as described oem part

Have purchased from this seller on prior occasions and have always had good experiences

Guest - July 27, 2021 Verified Purchase

worked as indicated.

gasket was packed great so as to not bend are was shipped on time as stated

Guest - September 19, 2019 Verified Purchase

parts in stock

Had the part I needed. Delivered in a timely fashion. I will consider eReplacementParts again.

John - 10 days ago Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Gasket