*This part replaces obsolete part #: K-188056.
Product Information
Description:
This is an original replacement part manufactured for use with Kirby vacuums. Gaskets are used to seal parts of an assembly and this gasket is used in different locations on several models. Please see model diagram for part location and use. |
Frequently Purchased With
Products Compatibility
This item works with the following types of products:
- • Vacuum
Questions & Answers for Gasket
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Wire cutter
The old tube tire causing dirt and dust to fly into the air
Removed the vacuum bag
Removed the torn tube
Fasten the tube on the bottom end by screwing the end around the plastic end. Then attaching the top end to the plastic piece and installing the zip tie around that end. Very easy.
Removed the torn tube
Fasten the tube on the bottom end by screwing the end around the plastic end. Then attaching the top end to the plastic piece and installing the zip tie around that end. Very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, wire cutters
emtor was broke where it attached to the vacuum
1. remove the emtor and bad holder from vacuum.
2. remove emtor from bag holder.
3. remove bag fill tub from emtor.
4. remove bag fill tub from top elbow that goes into bag.
5. assembly in reverse order.
2. remove emtor from bag holder.
3. remove bag fill tub from emtor.
4. remove bag fill tub from top elbow that goes into bag.
5. assembly in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information