This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
Gasket, Carburetor 753-06253
OEM part for: Craftsman, Bolens, Yard Machines, Yard Man
Part Number: 753-06253
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 71 machines
Craftsman
Bolens
Yard Machines
Yard Man
This item works with the following types of products:
- Blower Parts
- Trimmer Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket, Carburetor
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Carburetor bulb was cracked
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Wouldn't start after sitting in storage with old fuel in tank
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
2. Removed air filter cover and air filter
3. Disconnected and inspected fuel lines
4. Changed fuel line filter in tank
5. Disconnected throttle cable
6. Removed old carb
7. Installed new carb
8. Connected throttle cable
9. Connected fuel lines
10. Installed air cover with new filter
11. Removed old spark plug
12. Installed new spark plug
13. Added fuel to tank
14. Started on 2nd pull
15. Adjusted idle speed
Trimmer stalled when engine warmed. Fuel lines were dry rotted in fuel tank.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
2. Installed new tank
3. Removed air filter cover and air filter
4. Disconnected throttle cable from carb.
4. Removed carburetor bolts and pulled carb.
5. Placed new carb with new gasket on top.
6. Reinstalled air cleaner and carb bolts.
7. Connect fuel lines to carb.
8. Connect throttle cable to carb.
9. Install air filter and cover.
trimmer was very difficult to start and would quit running before fuel tank was half empty.
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Adjustable Wrench
2. removed engine cover
3.removed fuel tank
4. removed air cleaner assembly
5. removed pawl assembly ( used small cord in spark plug hole to add tension to unscrew it) 6 sprayed carbonator with cleaner
did reverse order replacing with new parts.
Started right up with 2 pulls! Still starts with one or two pulls and does not quit until the fuel tank is empty! Best money spent! Not only do I keep a good machine going but it starts faster and easier than the new ones on the market right now! Not difficult job. If a 72 year old lady can do it well?
Get it done! The parts came quickly and they were a perfect fit. TKS eReplacementParts!
Very hard to start and keep running. A new spark plug didn't fix it.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver, Torx bits
Nothing, parts were perfect!
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, None
Trimmer wouldn't start
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Hex keys
2. Removed carburetor
3, Cleaned carburetor and replaced O-rings, carburetor gasket and air filter.
4. Replaced spark plug
5. Fresh 40:1 fuel mix added, primed and trimmer started right away.
6. Finely tuned high speed and low speed carb adjustment screws
Would not run without choke
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Motor would start and idle but would die as soon as I gave it gass
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Dropped trimmer and broke carburetor and air filter assembly.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx bits
2. Placed new carb, gasket, and filter assembly on and replaced 2 screws holding them.
3. Reconnected throttle cable.
4. Replaced foam filter.
5. Started the trimmer up, no problems.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.