Easy
15-30 minutes
This fuse link is an original part from Broan. Constructed of metal and plastic, this item is compatible with several heater devices. The part is fitted onto the heating element of the appliance, helping the unit to produce heat. Screwdrivers and pliers are needed in making the repair. This component is sold individually. Please be sure to shut off the unit's electrical panel switch before making the replacement.
Fuse Link S53702000
OEM part for: Broan, Nutone
Part Number: S53702000
$39.86
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 9 machines
Nutone
605 Ceiling Heater View Diagrams & Manuals
660 Ceiling Heater View Diagrams & Manuals
665 Ceiling Heater View Diagrams & Manuals
665N Heat-A-Ventlite Heater View Diagrams & Manuals
Broan
605N Valuetest Series Heater/Fan - 1500 Watts / 70 Cfm / 4.5 Sones View Diagrams & Manuals
605 Valuetest Series Heater/Fan - 1500 Watts / 70 Cfm / 4.5 Sones View Diagrams & Manuals
665 Valuetest Series Heater/Fan/Light - 1500 Watts / 70 Cfm / 4.5 Sones View Diagrams & Manuals
665N Valuetest Series Heater/Fan/Light - 1500 Watts / 70 Cfm / 4.5 Sones View Diagrams & Manuals
660 Valuetest Series Heater/Light - 1500 Watts View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Heater Parts
This part replaces obsolete part #: 53702000
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
2
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Repair don't replace!
I purchased the fuse link to repair my bathroom fan/heater. Parts for a 30 + years old heater are hard to find, but these guys had it. The part arrived in an amazingly short time. Unfortunately, when I replaced the fuse link the heater worked, but the heater fan didn't. These guys had the part and within a week I was able to rebuild the heater and am back in business. Without eRleacementParts I would have had to replace the unit which meant changing the opening in my ceiling, involving reframing, sheetrock work and painting.
Thanks, Guys, for making my repair possible.
Guest -
October 23, 2022
Verified Purchase
Bathroom heater fan repair.
It was simple to find the part with model number. Part arrived quickly and fit perfectly. Saved replacing the whole unit. Saved big $$$.
Guest -
February 27, 2020
Verified Purchase
The right part delivered quickly
Right part
James -
September 7, 2019
Verified Purchase
Very effecient and easy to order. Shipping cost is extremely excessive!
The part was exactly as advertised, and worked perfectly
Richard -
March 4, 2024
Verified Purchase
Worked just like it was supposed to. Great service
Took a little longer to get, but still got here fine. No problems!!
Guest -
September 29, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Fuse Link
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Heater section of Heat/Vent/Light quit working....no heat fan either
George - March 19, 2017
👍 5 of 5 people found this instruction helpful
Tool Type
Heater
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
1. Removed light cover, removed vent cover.
2. Unplugged light receptacle & reflector.
3..Removed light receptacle & reflector.one screw.
4. Removed heater housing, two screws, lift up off of hanger screws.
5 Unclip power lead from fuse link module..
6. Remove heater power wire from fuse link module, one nut..
7. Remove & replace fuse link module.
8. Re-assemble in reverse order
( Determined fuse was defective by bypassing, fan then ran ).
2. Unplugged light receptacle & reflector.
3..Removed light receptacle & reflector.one screw.
4. Removed heater housing, two screws, lift up off of hanger screws.
5 Unclip power lead from fuse link module..
6. Remove heater power wire from fuse link module, one nut..
7. Remove & replace fuse link module.
8. Re-assemble in reverse order
( Determined fuse was defective by bypassing, fan then ran ).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuse blew
Edward - March 7, 2022
Tool Type
Heater
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed cover
Removed blown fuse
Replaced with new fuse
Replace cover
Removed blown fuse
Replaced with new fuse
Replace cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The heat filament burned out
judith - March 29, 2019
Tool Type
Heater
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed the filament by unscrewing nut on bolt. Replaced broken filament, replaced nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heater would not operate on a Nutone model 605.
Michael - March 8, 2018
Tool Type
Heater
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
After replacing the heater plug which had shorted out, I bypassed the fuse link and verified it being bad.
I ordered a new fuse link a nd installed it in less than a minute. Plugged it into outlet to insure it was fixed before the final install.
I then replaced the heating unit with 4 screws to secure it in the Nutone housing
Finally, I then reassembled the reflector, light unit and and lens cover plate.
An easy fix. I have three of these units in my home. The heater assembly unit is no longer available for this model,so knowing how to repair them is a money saver.
I truly appreciate the ease of ordering from eReplacementParts.com.
I ordered a new fuse link a nd installed it in less than a minute. Plugged it into outlet to insure it was fixed before the final install.
I then replaced the heating unit with 4 screws to secure it in the Nutone housing
Finally, I then reassembled the reflector, light unit and and lens cover plate.
An easy fix. I have three of these units in my home. The heater assembly unit is no longer available for this model,so knowing how to repair them is a money saver.
I truly appreciate the ease of ordering from eReplacementParts.com.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ceiling heater would not turn on
Elliot - August 12, 2017
Tool Type
Heater
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the old fuse link and inserted new fuse link after taking off the housing cover and turning off the electrical panel switch to the unit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuse was out causing heater not to work
Linda - December 29, 2016
Tool Type
Heater
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
I took fuse out of different heater in house and replaced in heater not working, fixed it. Ordered the fuse from ereplacement parts and put the new part in. This is a very easy job.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuse link on heater burnt out
James - December 14, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Heater
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
1. Removed cover plate over ceiling light and heater
2. Removed light
3. Removed heater coil assembly
4. Tested fuse link with ohmmeter to determine it was open
5. Ordered fuse link
6. Removed wires from old part
7. Removed old fuse link, installed new one
8. Attached wires to new fuse link
9. Installed heater assembly, light, cover plate
2. Removed light
3. Removed heater coil assembly
4. Tested fuse link with ohmmeter to determine it was open
5. Ordered fuse link
6. Removed wires from old part
7. Removed old fuse link, installed new one
8. Attached wires to new fuse link
9. Installed heater assembly, light, cover plate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heater would not work
Blaine - February 5, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Heater
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Check fuse link with multimeter and found it to be bad. Unscrewed it from heating element and replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
