Install
Videos!

Watch The
Repair Video

Fuel Filter A369000470

Part Number: A369000470

5 Reviews

Order within the next 12 hours
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 13120514931, 13120002830, 13120021330, 13120005330, 13120514930, 131200-02830, 13120500830, 13120505230, 13120005230 and 131205-00830.

Product Information

Description:

It is a genuine OEM approved replacement item specially designed for use with Echo gas powered handheld tools. This replacement fuel-strainer/filter fits inside of the fuel tank. The purpose of this item is to filter out dirt and debris from contaminating engines. Over time fuel filter will get clogged and restrict the fuel getting to the carburetor. At this point filter should be replaced. This filter consists of a metal body with fabric filter material and it is sold individually.

Warning: California's Proposition 65

Frequently Purchased With

Spark Plug
$3.99

Spark Plug - C..
$6.51

Filter, Air
$14.67

Fuel Tank Vent..
$7.63

Pre-filter, Fo..
$3.99

Spark Plug - R..
$6.81

Purge Bulb
$4.99

Filter-air
$16.18

Compatibility

This part is compatible with the following machines:

Echo

CS-302S (30501 - 64670) Chainsaw
CS-302S (30501 - 64670) Chainsaw
CS-315 (Before S/N 058000) Chainsaw
CS-315 (Before S/N 058000) Chainsaw
CS-315 (058001 - 090010) Chainsaw
CS-315 (058001 - 090010) Chainsaw
CS-330EVL Chainsaw
CS-330EVL Chainsaw
K-3S
K-3W
KEH-202D
S-2P
HT-200 Hedge Trimmer
HT-200 Hedge Trimmer
PB-200 (001001 - 099999) Handheld Blower
CS-351VL Chainsaw
CS-351VL Chainsaw
CS-400EVL Chainsaw
CS-400EVL Chainsaw
CS-400EVLP Chainsaw
CS-400EVLP Chainsaw
CS-451VL Chainsaw
CS-451VL Chainsaw
CS-452VL (0 - 0230441) Chainsaw
CS-452VL (0 - 0230441) Chainsaw
CS-452VL (After S/N 023442) Chainsaw
CS-452VL (After S/N 023442) Chainsaw
CS-500EVL Chainsaw
CS-500EVL Chainsaw
CS-500EVLP Chainsaw
CS-500EVLP Chainsaw
CS-500VL (001001 - 049000) Chainsaw
CS-500VL (001001 - 049000) Chainsaw
CS-500VL (After S/N 049001) Chainsaw
CS-500VL (After S/N 049001) Chainsaw
CS-510EVL Chainsaw
CS-510EVL Chainsaw
CS-510EVLP Chainsaw
CS-510EVLP Chainsaw
CS-550EVL Chainsaw
CS-550EVL Chainsaw
CS-550EVLP Chainsaw
CS-550EVLP Chainsaw
CS-601S Chainsaw
CS-601S Chainsaw
CS-601SVL Chainsaw
CS-601SVL Chainsaw
CS-602VL Chainsaw
CS-602VL Chainsaw
CS-650EVL Chainsaw
CS-650EVL Chainsaw
CS-660EVL Chainsaw
CS-660EVL Chainsaw
CS-440EVL Chainsaw
CS-440EVL Chainsaw
CS-271T 26.9cc Top Handle Chainsaw
CS-271T 26.9cc Top Handle Chainsaw
CS-352 34cc Chainsaw
CS-352 34cc Chainsaw
CS-3500 Chainsaw
CS-3500 Chainsaw
CS-350TES Chainsaw
CS-350TES Chainsaw
CS-350TES (S/N:�C24126001001�-�C24126999999) Chainsaw
CS-350TES (S/N:�C24126001001�-�C24126999999) Chainsaw
CS-350TES (S/N:�C48736001001�-�C48736999999) Chainsaw
CS-350TES (S/N:�C48736001001�-�C48736999999) Chainsaw
CS-341 (C23111001001-C23111999999) Chainsaw
CS-341 (C23111001001-C23111999999) Chainsaw
CS-271T (C21112001001 - C21112999999) 26.9cc Top Handle Chain Saw
CS-271T (C21112001001 - C21112999999) 26.9cc Top Handle Chain Saw
CS-271T (C21211001001 - C21211999999) 26.9cc Top Handle Chain Saw
CS-271T (C21211001001 - C21211999999) 26.9cc Top Handle Chain Saw
CS-271T (C21313001001 - C21313999999) 26.9cc Top Handle Chain Saw

Little Wonder

SV-3

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Blower
• Chain Saw
• Grass Trimmer
• Hedge Trimmer
• Saw
• Trimmer

Repair Guides

Articles:

How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)

Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....

May 27, 2015

Questions & Answers for Fuel Filter

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

10 of 11 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Fuel Filter - A369000470

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Wire with a hook bent into it

Fuel filter plugged up

I bent a hook on a small wire to reach into the fuel tank to snag the fuel line. Pulled the fuel line out of the tank, with the filter on end.
Took the old filter off, put the new one on, put the filter into fuel tank. Started up chainsaw, problem was solved

Reach down as far as you can to snag the fuel line, the filter is in the bottom of fuel tank

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Spark Plug - Rcj-6y - 15901731730

Fuel Filter - A369000470

Filter-air - 13031040930

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Socket set

Tune-up

Basic common sense. Use You-tube if you get stuck. E replacement parts is a very good company. Low prices and delivery on time as promised. Thanks

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Strainer, Oil - 43620502832

Fuel Filter - A369000470

Pipe-Fuel - 13201003930

Pipe-fuel-outer - 13201210131

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

Dried up fuel lines, damage due to ethanol in gas,and age

Removed the starter side housing, removed the in-tank feed through retaining screw. removed the feed through by gently twisting and prying on the flange. Being careful not to break the 50 year old plastic part. after removing the assembly, clean out the remains of the old in tank hose and strainer. remove the outer fuel line from the carburetor. Then re-installed the new parts. make sure you replace the 2 o-rings on the feed through. also lubricate the o-rings with a bit of oil to make it easier to install back into the tank.

Hope this helps, not good at writing instructions, but I tried :-)

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Fuel Filter - A369000470

Spark Plug - Cmr7h - A425000060

Filter, Air - A226002030

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Socket set

Rough running, stalls out.

Changed the old crap with the new crap.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Strainer, Oil - 43620502832

Fuel Filter - A369000470

Pipe-oil - 43721103932

Gasket Kit - 88900013331

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Socket set, Nutdriver, Adjustable Wrench

oil pick-up bad

complete tare down and reassemble

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Fuel Pipe Kit - 13200700760

Fuel Filter - A369000470

Pipe-vent-3x5x65mm - V471001881

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, hook to pull fuel line out of tank

low fuel delivery - stalling

removed old parts by hand.
needed hook to pull fuel line out of tank
pushed tubes and filter on line
primed engine
started

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Purge Bulb - 12318140630

Fuel Filter - A369000470

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Primer was eaten up by fuel, fuel filter was dirty

Remove the screw from the primer cover
Remove the old primer and insert the new primer
Use a pair of needle nose pliers and grasp the fuel line with the filter on it and pull it out of the tank.
Remove the old filter and install the new filter

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Spark Plug - 15901019830

Fuel Filter - A369000470

Purge Bulb - 12318139130

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Primer bulb cracked

1. Replaced the primer bulb.
2. Replaced the spark plug.
3. Replaced the fuel filter.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

5 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Had exactly what I was looking. Kept delivery promises. Fit perfectly.

Part was for a 21 year old Echo chain saw. Started first pull.

Guest - January 20, 2021 Verified Purchase

Easy Repair - worked as expected

Was in good condition - arrived quickly - worked as expected

Phil - October 9, 2019 Verified Purchase

fast shipping

just what i needed

Guest - September 13, 2019 Verified Purchase

Worked as expected

Thanks

Guest - August 2, 2019 Verified Purchase

Took too long to arrive

This guys take long to processs your. Order

Guest - June 7, 2020 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Repair Guides

Articles:

How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)

Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....

May 27, 2015