eReplacementParts.com
877-346-4815
Husqvarna Parts

Fuel Hose 501285902

OEM part for: Husqvarna

Part Number: 501285902


Install
Videos!
Fuel Hose - 501285902:Husqvarna 360 View
Fuel Hose - 501285902:HusqvarnaFuel Hose - 501285902:HusqvarnaFuel Hose - 501285902:Husqvarna 360 View
In Stock
Ships within 1 business day
Medium 15-30 minutes (4 rated repairs)?
OEM: Original Equipment Manufacturer ?
Husqvarna
Does this d-block d-md-none fit my product?

Product Description ?

An authentic OEM sourced replacement fuel hose, it is specially produced for use on Husqvarna chainsaws. This is the hose that the in-tank fuel filter is connected to, it supplies fuel from the tank into the carburetor. Over time the rubber may become brittle and crack eventually requiring replacement. It is a high quality rubber hose that is sold individually.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 38 machines

Husqvarna

61 (1980-02) Chainsaw View Diagrams & Manuals
61 (1981-02) Chainsaw View Diagrams & Manuals
61 (1982-05) Chainsaw View Diagrams & Manuals
61 (1983-09) Chainsaw View Diagrams & Manuals
61 (1984-01) Chainsaw View Diagrams & Manuals
61 (1984-10) Chainsaw View Diagrams & Manuals
61 (1985-06) Chainsaw View Diagrams & Manuals
61 (1986-03) Chainsaw View Diagrams & Manuals
61 (1986-12) Chainsaw View Diagrams & Manuals
61 (1987-11) Chainsaw View Diagrams & Manuals
61 (1988-06) Chainsaw View Diagrams & Manuals
66 (1987-06) Chainsaw View Diagrams & Manuals
66 (1991-03) Chainsaw View Diagrams & Manuals
266 (1981-09) Chainsaw View Diagrams & Manuals
266 (1982-12) Chainsaw View Diagrams & Manuals
266 (1983-06) Chainsaw View Diagrams & Manuals
266 (1984-08) Chainsaw View Diagrams & Manuals
266 (1984-10) Chainsaw View Diagrams & Manuals
266 (1985-01) Chainsaw View Diagrams & Manuals
266 (1985-06) Chainsaw View Diagrams & Manuals
266 (1986-01) Chainsaw View Diagrams & Manuals
266 (1986-04) Chainsaw View Diagrams & Manuals
266 (1986-12) Chainsaw View Diagrams & Manuals
266 (1987-11) Chainsaw View Diagrams & Manuals
266 (1988-06) Chainsaw View Diagrams & Manuals
266 (1989-02) Chainsaw View Diagrams & Manuals
266 (1990-01) Chainsaw View Diagrams & Manuals
268 (1987-05) Chainsaw View Diagrams & Manuals
268 (1987-11) Chainsaw View Diagrams & Manuals
268 (1989-02) Chainsaw View Diagrams & Manuals
268 (1990-05) Chainsaw View Diagrams & Manuals
268 (1991-02) Chainsaw View Diagrams & Manuals
162 (1980-02) Chainsaw View Diagrams & Manuals
162 (1980-12) Chainsaw View Diagrams & Manuals
268 K (1989-01) Power Cutter View Diagrams & Manuals
268 K (1991-04) Power Cutter View Diagrams & Manuals
268 K (1991-09) Power Cutter View Diagrams & Manuals
272K (1991-09) Power Cutter View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Chain Saw Parts
  • Saw Parts

This part replaces obsolete part #: 5012859-01, 501285901

Customer Part Reviews ?

5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • fuel line repair
    part received in a timely manner and fit is perfect.
    Guest - July 26, 2023 Verified Purchase
    Great service.
    Couldn't ask for anything different, part was exactly what I wanted. They always have what I need in stock, even on older models
    Guest - September 11, 2019 Verified Purchase
    Quick delivery
    Everything as advertised and quick delivery
    Guest - July 25, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Fuel Hose


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 15-30 minutes (4 rated repairs)?

    Fuel line old and soft

    Robert - June 9, 2017
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Chain Saw

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Wrench Set

    The chain saw was given to me, hadn't been run if a couple years. Disassembled some of the saw to allow easier access to the fuel line and other components and did a thorough cleaning. I used a long zip tie threaded down through the fuel hose hole in the top of the fuel tank and out the tank fill hole, pushed the carb end of the new fuel line on to the zip tie and pulled the new line into place, worked like a charm!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Had a hole in the fuel line in the tank.

    GARRET - November 1, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers

    1. Confirmed that the replacement parts were the same.
    2. Removed the old fuel hose and the grommet.
    3. Fished a wire through the new fuel line and then through the tank up to the carburetor. 4. Lubed the integral grommet on the hose with oil
    5. Started the hose through the hole, held it in place, installed the new fuel filter, and pulled the new hose into position.
    6. Hooked the hose to the carburetor and finished putting my saw together. Job done!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Antivibe elements broke, gas line leaking

    Doug - January 12, 2020
    Tool Type

    Chain Saw

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Forceps

    Removed powerhead from handle assembly. Removed broken suspension parts and installed new elements. Replaced fuel line during reassembly. Used forceps to pull in the fuel line.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Rotten fuel line

    Scott - February 8, 2017
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers, long needle nose plyers

    Removed old line out of tank and filter, lubed new hose to slide into place easier hose is flexible enough to stretch to install fuel filter.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal