*This part replaces obsolete part #: 5035776-02, 5817562-02, 581756202, 544325002 and 503577602.
Product Information
Description:
This is an Authentic OEM sourced replacement part designed for use with Husqvarna Chainsaws. This is the Hose that delivers fuel from the Tank to the Engine. It is made out of Rubber and it is Sold Individually. Please note Fuel Filter is Sold Separately. |
Frequently Purchased With
Compatibility
the 150+ compatible machines
This part is compatible with the following machines:
Husqvarna
570 (2005-04) Chainsaw
570 (2005-04) Chainsaw
570 (2007-01) Chainsaw
570 (2007-01) Chainsaw
570 (2008-08) Chainsaw
570 (2008-08) Chainsaw
570 EPA (2004-09) Chainsaw
570 EPA (2004-09) Chainsaw
570 EPA (2005-04) Chainsaw
570 EPA (2005-04) Chainsaw
570 EPA (2008-08) Chainsaw
570 EPA (2008-08) Chainsaw
570 XP (2007-01) Chainsaw
570 XP (2007-01) Chainsaw
575 XP (2005-04) Chainsaw
575 XP (2005-04) Chainsaw
575 XP (2007-01) Chainsaw
575 XP (2007-01) Chainsaw
575 XP EPA (2004-09) Chainsaw
575 XP EPA (2004-09) Chainsaw
575 XP EPA (2007-01) Chainsaw
575 XP EPA (2007-01) Chainsaw
575 XP EPA (2005-04) Chainsaw
575 XP EPA (2005-04) Chainsaw
576 XP (2008-08) Chainsaw
576 XP (2008-08) Chainsaw
576 XP EPA (2008-08) Chainsaw
576 XP EPA (2008-08) Chainsaw
455 E (2007-01) Chainsaw
455 E (2007-01) Chainsaw
455 E (2006-06) Chainsaw
455 E (2006-06) Chainsaw
455 (2004-10) Chainsaw
455 (2004-10) Chainsaw
455 (2005-01) Chainsaw
455 (2005-01) Chainsaw
455 (2005-03) Chainsaw
455 (2005-03) Chainsaw
455 Rancher (2006-02) Chainsaw
455 Rancher (2006-02) Chainsaw
455 (2006-06) Chainsaw
455 (2006-06) Chainsaw
455 (2007-01) Chainsaw
455 (2007-01) Chainsaw
460 (2005-03) Chainsaw
460 (2005-03) Chainsaw
460 (2006-02) Chainsaw
460 (2006-02) Chainsaw
460 (2006-06) Chainsaw
460 (2006-06) Chainsaw
460 (2007-01) Chainsaw
460 (2007-01) Chainsaw
357 XP (2007-03) Chainsaw
357 XP (2007-03) Chainsaw
357 XP (EPA) (2006-02) Chainsaw
357 XP (EPA) (2006-02) Chainsaw
357 XP (EPA) (2003-04) Chainsaw
357 XP (EPA) (2003-04) Chainsaw
357 XP (EPA) (2004-05) Chainsaw
357 XP (EPA) (2004-05) Chainsaw
357 XP (EPA) (2005-02) Chainsaw
357 XP (EPA) (2005-02) Chainsaw
357 XP (EPA) (2007-03) Chainsaw
357 XP (EPA) (2007-03) Chainsaw
359 (2001-01) Chainsaw
359 (2001-01) Chainsaw
359 (2003-04) Chainsaw
359 (2003-04) Chainsaw
359 (2004-05) Chainsaw
359 (2004-05) Chainsaw
359 (2005-02) Chainsaw
359 (2005-02) Chainsaw
359 (2006-02) Chainsaw
359 (2006-02) Chainsaw
359 (2007-03) Chainsaw
570 (2005-04) Chainsaw
570 (2007-01) Chainsaw
570 (2007-01) Chainsaw
570 (2008-08) Chainsaw
570 (2008-08) Chainsaw
570 EPA (2004-09) Chainsaw
570 EPA (2004-09) Chainsaw
570 EPA (2005-04) Chainsaw
570 EPA (2005-04) Chainsaw
570 EPA (2008-08) Chainsaw
570 EPA (2008-08) Chainsaw
570 XP (2007-01) Chainsaw
570 XP (2007-01) Chainsaw
575 XP (2005-04) Chainsaw
575 XP (2005-04) Chainsaw
575 XP (2007-01) Chainsaw
575 XP (2007-01) Chainsaw
575 XP EPA (2004-09) Chainsaw
575 XP EPA (2004-09) Chainsaw
575 XP EPA (2007-01) Chainsaw
575 XP EPA (2007-01) Chainsaw
575 XP EPA (2005-04) Chainsaw
575 XP EPA (2005-04) Chainsaw
576 XP (2008-08) Chainsaw
576 XP (2008-08) Chainsaw
576 XP EPA (2008-08) Chainsaw
576 XP EPA (2008-08) Chainsaw
455 E (2007-01) Chainsaw
455 E (2007-01) Chainsaw
455 E (2006-06) Chainsaw
455 E (2006-06) Chainsaw
455 (2004-10) Chainsaw
455 (2004-10) Chainsaw
455 (2005-01) Chainsaw
455 (2005-01) Chainsaw
455 (2005-03) Chainsaw
455 (2005-03) Chainsaw
455 Rancher (2006-02) Chainsaw
455 Rancher (2006-02) Chainsaw
455 (2006-06) Chainsaw
455 (2006-06) Chainsaw
455 (2007-01) Chainsaw
455 (2007-01) Chainsaw
460 (2005-03) Chainsaw
460 (2005-03) Chainsaw
460 (2006-02) Chainsaw
460 (2006-02) Chainsaw
460 (2006-06) Chainsaw
460 (2006-06) Chainsaw
460 (2007-01) Chainsaw
460 (2007-01) Chainsaw
357 XP (2007-03) Chainsaw
357 XP (2007-03) Chainsaw
357 XP (EPA) (2006-02) Chainsaw
357 XP (EPA) (2006-02) Chainsaw
357 XP (EPA) (2003-04) Chainsaw
357 XP (EPA) (2003-04) Chainsaw
357 XP (EPA) (2004-05) Chainsaw
357 XP (EPA) (2004-05) Chainsaw
357 XP (EPA) (2005-02) Chainsaw
357 XP (EPA) (2005-02) Chainsaw
357 XP (EPA) (2007-03) Chainsaw
357 XP (EPA) (2007-03) Chainsaw
359 (2001-01) Chainsaw
359 (2001-01) Chainsaw
359 (2003-04) Chainsaw
359 (2003-04) Chainsaw
359 (2004-05) Chainsaw
359 (2004-05) Chainsaw
359 (2005-02) Chainsaw
359 (2005-02) Chainsaw
359 (2006-02) Chainsaw
359 (2006-02) Chainsaw
359 (2007-03) Chainsaw
359 (2007-03) Chainsaw
359 EPA (2006-02) Chainsaw
359 EPA (2006-02) Chainsaw
359 EPA (2001-10) Chainsaw
359 EPA (2001-10) Chainsaw
359 EPA (2003-04) Chainsaw
359 EPA (2003-04) Chainsaw
359 EPA (2004-05) Chainsaw
359 EPA (2004-05) Chainsaw
359 EPA (2005-02) Chainsaw
359 EPA (2005-02) Chainsaw
359 EPA (2007-03) Chainsaw
359 EPA (2007-03) Chainsaw
362 (1999-05) Chainsaw
362 (1999-05) Chainsaw
362 (1999-11) Chainsaw
362 (1999-11) Chainsaw
362 (2003-10) Chainsaw
362 (2003-10) Chainsaw
362 (2005-05) Chainsaw
362 (2005-05) Chainsaw
362 (2007-01) Chainsaw
362 (2007-01) Chainsaw
362 EPA (2007-01) Chainsaw
362 EPA (2007-01) Chainsaw
362 EPA (1999-11) Chainsaw
362 EPA (1999-11) Chainsaw
362 EPA (2001-10) Chainsaw
362 EPA (2001-10) Chainsaw
362 EPA (2003-10) Chainsaw
362 EPA (2003-10) Chainsaw
362 EPA (2005-05) Chainsaw
362 EPA (2005-05) Chainsaw
362 XP (2005-05) Chainsaw
362 XP (2005-05) Chainsaw
365 (1996-09) Chainsaw
365 (1996-09) Chainsaw
365 (1997-12) Chainsaw
365 (1997-12) Chainsaw
365 EPA (1997-12) Chainsaw
365 EPA (1997-12) Chainsaw
365 EPA (1999-04) Chainsaw
365 EPA (1999-04) Chainsaw
365 (1999-11) Chainsaw
365 (1999-11) Chainsaw
365 (2003-11) Chainsaw
365 (2003-11) Chainsaw
365 (2005-05) Chainsaw
365 (2005-05) Chainsaw
365 EPA (1999-11) Chainsaw
365 EPA (1999-11) Chainsaw
365 EPA (2002-01) Chainsaw
365 EPA (2002-01) Chainsaw
365 EPA (2003-11) Chainsaw
365 EPA (2003-11) Chainsaw
365 EPA (2005-05) Chainsaw
365 EPA (2005-05) Chainsaw
365 EPA (2007-03) Chainsaw
365 EPA (2007-03) Chainsaw
371 (1996-09) Chainsaw
371 (1996-09) Chainsaw
371 (1997-12) Chainsaw
371 (1997-12) Chainsaw
371 (1999-05) Chainsaw
371 (1999-05) Chainsaw
371 EPA (1997-12) Chainsaw
371 EPA (1997-12) Chainsaw
371 EPA (1999-05) Chainsaw
371 EPA (1999-05) Chainsaw
371 K (2003-08) Chainsaw
371 K (2003-08) Chainsaw
371 K EPA (2003-08) Chainsaw
371 K EPA (2003-08) Chainsaw
372 (1999-11) Chainsaw
372 (1999-11) Chainsaw
359 EPA (2006-02) Chainsaw
359 EPA (2006-02) Chainsaw
359 EPA (2001-10) Chainsaw
359 EPA (2001-10) Chainsaw
359 EPA (2003-04) Chainsaw
359 EPA (2003-04) Chainsaw
359 EPA (2004-05) Chainsaw
359 EPA (2004-05) Chainsaw
359 EPA (2005-02) Chainsaw
359 EPA (2005-02) Chainsaw
359 EPA (2007-03) Chainsaw
359 EPA (2007-03) Chainsaw
362 (1999-05) Chainsaw
362 (1999-05) Chainsaw
362 (1999-11) Chainsaw
362 (1999-11) Chainsaw
362 (2003-10) Chainsaw
362 (2003-10) Chainsaw
362 (2005-05) Chainsaw
362 (2005-05) Chainsaw
362 (2007-01) Chainsaw
362 (2007-01) Chainsaw
362 EPA (2007-01) Chainsaw
362 EPA (2007-01) Chainsaw
362 EPA (1999-11) Chainsaw
362 EPA (1999-11) Chainsaw
362 EPA (2001-10) Chainsaw
362 EPA (2001-10) Chainsaw
362 EPA (2003-10) Chainsaw
362 EPA (2003-10) Chainsaw
362 EPA (2005-05) Chainsaw
362 EPA (2005-05) Chainsaw
362 XP (2005-05) Chainsaw
362 XP (2005-05) Chainsaw
365 (1996-09) Chainsaw
365 (1996-09) Chainsaw
365 (1997-12) Chainsaw
365 (1997-12) Chainsaw
365 EPA (1997-12) Chainsaw
365 EPA (1997-12) Chainsaw
365 EPA (1999-04) Chainsaw
365 EPA (1999-04) Chainsaw
365 (1999-11) Chainsaw
365 (1999-11) Chainsaw
365 (2003-11) Chainsaw
365 (2003-11) Chainsaw
365 (2005-05) Chainsaw
365 (2005-05) Chainsaw
365 EPA (1999-11) Chainsaw
365 EPA (1999-11) Chainsaw
365 EPA (2002-01) Chainsaw
365 EPA (2002-01) Chainsaw
365 EPA (2003-11) Chainsaw
365 EPA (2003-11) Chainsaw
365 EPA (2005-05) Chainsaw
365 EPA (2005-05) Chainsaw
365 EPA (2007-03) Chainsaw
365 EPA (2007-03) Chainsaw
371 (1996-09) Chainsaw
371 (1996-09) Chainsaw
371 (1997-12) Chainsaw
371 (1997-12) Chainsaw
371 (1999-05) Chainsaw
371 (1999-05) Chainsaw
371 EPA (1997-12) Chainsaw
371 EPA (1997-12) Chainsaw
371 EPA (1999-05) Chainsaw
371 EPA (1999-05) Chainsaw
371 K (2003-08) Chainsaw
371 K (2003-08) Chainsaw
371 K EPA (2003-08) Chainsaw
371 K EPA (2003-08) Chainsaw
372 (1999-11) Chainsaw
372 (1999-11) Chainsaw
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
Questions & Answers for Fuel Hose
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
6 of 8 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Nutdriver, Two picks, one straight, one 90 degrees, knife
Prime bulb return line dry rotted, leaking gas.
1. Remove chain and bar( for easy maneuverability), empty gas in tank, then top cover, followed by handle and throttle grip. The throttle has to be disconnected from carb, and you have to spin the linkage to remove because it does not come straight out.
2. You can choose to remove carb, I was able to do repair without removing, probably more difficult, but might have saved a little time. I removed return line and fuel lines and prime bulb from saw, followed by grommets. To remove fuel line you have to open gas tank and pull out filter and fuel line with your 90 degree pick. Remove filter and hose, replace with new.
3. When I replaced grommets and hose, I put a little oil on them to make things go on a little easier. I found it is easier to install grommets on hose first and then install grommets on saw. You can always push and pull hose through.
4. Once all hoses are on and secure, reinstall your filter on line and replace inside tank. I cut about two inches off the tank line before installing filter, just because it seemed a little long, your choice. I only had one line that was bad, but I figured while I was replacing one, might as well do them all, the others are probably going to fail soon.
5. In order to replace exhaust screen, you will have to remove chain break handle, two hex head bolts, slide screen out, slide new one in and done.
6. Once installed, I reassembled everything in the reverse order it come out. Chain brake handle, main handle then throttle cover, remember to install throttle linkage, you have to spin it to get back next to the carb, this can be a little tedious, but make sure it is where it needs to go before bolting main handle on, or you have to take it apart again(my mistake).
7. After throttle cover, replace your top cover, and chain and bar, add gas and your good to go.
2. You can choose to remove carb, I was able to do repair without removing, probably more difficult, but might have saved a little time. I removed return line and fuel lines and prime bulb from saw, followed by grommets. To remove fuel line you have to open gas tank and pull out filter and fuel line with your 90 degree pick. Remove filter and hose, replace with new.
3. When I replaced grommets and hose, I put a little oil on them to make things go on a little easier. I found it is easier to install grommets on hose first and then install grommets on saw. You can always push and pull hose through.
4. Once all hoses are on and secure, reinstall your filter on line and replace inside tank. I cut about two inches off the tank line before installing filter, just because it seemed a little long, your choice. I only had one line that was bad, but I figured while I was replacing one, might as well do them all, the others are probably going to fail soon.
5. In order to replace exhaust screen, you will have to remove chain break handle, two hex head bolts, slide screen out, slide new one in and done.
6. Once installed, I reassembled everything in the reverse order it come out. Chain brake handle, main handle then throttle cover, remember to install throttle linkage, you have to spin it to get back next to the carb, this can be a little tedious, but make sure it is where it needs to go before bolting main handle on, or you have to take it apart again(my mistake).
7. After throttle cover, replace your top cover, and chain and bar, add gas and your good to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 10 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Long needle nose pliers
Fuel hose leaking
Drained fuel. Took old fuel hose out.removed fuel filter, replaced filter on new hose. Removed other end from carburetor. Put on new fuel hose in..(a little tough) but chainsaw works flawlessly now. I have a Husqvarna 345.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers
Saw would run briefly and then shut off. Fuel hose was rotted and leaking gas at carburetor entry
Removed saw from handles and frame, disassembled the carburetor and throttle linkage. Replaced fuel filter and gromment along with the bad fuel line and reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Long handle locking needle nose pliers
Would not hold prime, would not start or run
Replaced the primer bulb (air purge), and the fuel line from the carburetor to the tank. Have to remove the cylinder cover and air filter to access fuel lines. Getting the new fuel line into the tank beside the carburetor is the most difficult part. The fuel line is spiraled, or coiled from the factory and is this way on purpose so it can flop back and forth inside the tank regardless of what position the chainsaw is held. This creates a bit of an issue getting the fuel line into the small bushing it goes thru in the tank. A little ingenuity and patience will get it done. I used the hemostats and a very long piece of wire to pull the fuel line thru into the tank. The hemostats also helped out greatly getting the new fuel line in place on the nipple on the carburetor because the throttle linkage does not leave enough room for fingers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Various tools
fuel lines deteriorated from age and fuel
Took top of saw apart to get to the opening where the fuel line goes from the carb to the tank. installed new hose and original fuel filter. Installed straight hose. Put the saw back together. Runs fine after repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
Wear and tear, leaking bar oil, fuel lined cracked and running lean,
Watched u-tube videos for each individual repair
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, twezzers
leaking gas
look at youtube
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Torx driver
Leaking fuel
Removed top cover & replaced the hose from primer bulb to fuel tank. Hose had to be pushed in to grommet above tank. This required the use of locking forceps to force the hose in to the grommet.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, sheet rock knife
hard starting
replace the above parts along with the primer bulb
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Defective old Gas line replaced with rubhber line
It went well , the old Gas line originally made from transparent flexible plastic was 50 thousand of an inched smaller than the replacement line purchased , the new one was made of rubber meaning that it had a better seal as it went trough the gas tanks , this one being 50 thousand larger than the original provided a better seal so I did not lost pressure in the tank meaning the saw no longer starved for gas .
I am very satisfy with the result.
Pete
I am very satisfy with the result.
Pete
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
5 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
very easy repair, 2 min. repair
correct part arrived on time
Guest -
April 6, 2020
Verified Purchase
Worked as expected
Part fit and worked as expected
Guest -
March 24, 2020
Verified Purchase
great part, it fit as expected
the fuel hose fit. Thought I would not need it but found old line broken.. chainsaw works.
Guest -
January 1, 2020
Verified Purchase
What I expected.
Parts were what expected and were exact replacements
Guest -
January 28, 2020
Verified Purchase
Short
This fuel line was short. After rebuilding the intake and using a piece there the remaining line was short
Ed -
April 18, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1