Firing Valve Assembly BA0164
Part Number: BA0164
Order within the next 10 hours
and your part ships today!
and your part ships today!
Product Information
Description:
| The firing valve goes next to the seal. It is an OEM from Senco for use in nailers. This part is sold individually and is made of metal. An allen wrench may be required to replace this item. It will require replacing if it breaks. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Firing Valve Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen Wrench
Firing valve "Bumper" seal was severely damaged.
1. Removed the four Allen screws on the top assembly by easing off 2 screws opposite each other to prevent the internal spring from damaging the gasket.
2. Then removed the other 2 screws by holding the top assembly.
3. Replaced the broken firing Valve.
4. Test fired the Finish nail gun. Now operating as intended.
2. Then removed the other 2 screws by holding the top assembly.
3. Replaced the broken firing Valve.
4. Test fired the Finish nail gun. Now operating as intended.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
