eReplacementParts.com
877-346-4815
Echo Parts
Repair Parts Home  Power Tool Parts  Echo Parts  13031039132 Air Filter

Air Filter 13031039132

OEM part for: Echo

Part Number: 13031039132


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Ships within 1 business day
Easy Less than 15 minutes (18 rated repairs)?
OEM: Original Equipment Manufacturer ?
Echo
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Echo replacement part, it is sold individually.
The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage.

Once this type of filter gets clogged or dirty it should be changed (Not Cleaned).
This is to prevent restricted air flow and foreign matter from entering the engine.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 44 machines

Echo

CS-3000 (Type 1E) (After S/N 001001) Chainsaw View Diagrams & Manuals
CS-300 (03001001 - 03999999) Chainsaw View Diagrams & Manuals
CS-300 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-301 (02001001 - 02999999) Chainsaw View Diagrams & Manuals
CS-301 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-305 (03001001 - 03999999) Chainsaw View Diagrams & Manuals
CS-305 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-306 (02001001 - 02999999) Chainsaw View Diagrams & Manuals
CS-306 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-306 (C07511001001 - C07511999999) Chainsaw View Diagrams & Manuals
CS-306 (C08411001001 - C08411999999) Chainsaw View Diagrams & Manuals
CS-306 (C09413001001 - C09413999999) Chainsaw View Diagrams & Manuals
CS-340 (03001001 - 03999999) Chainsaw View Diagrams & Manuals
CS-341 (02001001 - 02999999) Chainsaw View Diagrams & Manuals
CS-340 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-341 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-3400 (Type 1) Chainsaw View Diagrams & Manuals
CS-3400 (Type 1E) Chainsaw View Diagrams & Manuals
CS-341 (C07611001001 - C07611999999) Chainsaw View Diagrams & Manuals
CS-341 (C08511001001 - C08511999999) Chainsaw View Diagrams & Manuals
CS-341 (C09513001001 - C09513999999) Chainsaw View Diagrams & Manuals
CS-345 (03001001 - 03999999) Chainsaw View Diagrams & Manuals
CS-345 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-3450 (Type 1) (001001 - 025666) Chainsaw View Diagrams & Manuals
CS-3450 (Type 1) (After S/N 025667) Chainsaw View Diagrams & Manuals
CS-3450 (Type 1E) (After S/N 001001) Chainsaw View Diagrams & Manuals
CS-346 (02001001-02006473) Chainsaw View Diagrams & Manuals
CS-346 (02006474 - 02999999) Chainsaw View Diagrams & Manuals
CS-346 (04001001 - 04999999) Chainsaw View Diagrams & Manuals
CS-341 (C23111001001-C23111999999) Chainsaw View Diagrams & Manuals
CS-3000 (Type 1) (After S/N 001001) Chainsaw View Diagrams & Manuals
CS-303T (C26012001001 - C26012999999) 30.1cc Top Handle Chain Saw View Diagrams & Manuals
CS-303T (C26111001001 - C26111999999) 30.1cc Top Handle Chain Saw View Diagrams & Manuals
CS-303T (C26213001001 - C26213999999) 30.1cc Top Handle Chain Saw View Diagrams & Manuals
CS-3000 (1)(001001-999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-3000 (1E)(001001-999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-3000 (20001001-20999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-303T (C31826001001-C31826999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-303T (C33214001001-C33214999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-303T (C67215001001-C67215999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-341 (C04112001001-C04112999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-341 (C24912001001-C24912999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-341 (C25013001001-C25013999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-346 (02001001-02999999) Chainsaw Lawn Equipment View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Chain Saw Parts
  • Saw Parts

This part replaces obsolete part #: 13031039131

Customer Part Reviews ?

5
Average Rating (out of 5):
9 Reviews
Click to filter by ratings:
5 stars
9
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • No Problem in ordering theParts.
    Parts were for my Chainsaw.
    Guest - January 18, 2023 Verified Purchase
    Chain saw parts
    Found the correct part for 15 year old chain saw which I love and received the product quick in great condition.
    Guest - July 15, 2022 Verified Purchase
    easy replacement
    I mean it's swapping out an air filter, one screw and your done. Not exactly brain surgery.
    Guest - June 23, 2020 Verified Purchase
    Replacement filter
    Price was good, it arrived within the time frame quoted.
    Guest - May 12, 2020 Verified Purchase
    Part was great fit
    Ordered part thanksgiving morning arrived quickly and fit correctly
    Guest - December 15, 2019 Verified Purchase
    Echo Chainsaw
    Works great
    Frank - October 3, 2019 Verified Purchase
    Quality parts, fast shipping
    Everything was correct and showed up on time, as always.
    Guest - September 21, 2019 Verified Purchase
    good part and was well priced.
    air filter arrived in a timely manner and was in good shape when arrived.
    Guest - September 19, 2019 Verified Purchase
    Quick Fix
    The order arrived quickly. Chainsaw running again with clean air.
    Guest - July 26, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Air Filter


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (18 rated repairs)?

    Clogged filter.

    Patrick - November 28, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Replaced the old filter with the new one.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Purge bulb cracked

    James - February 16, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    1. Remove air filter cover with screwdriver.
    2. Remove air filter.
    3. Remove vent tubes to carb from purge bulb.
    4. Using long nose pliers, squeeze clips together that hold bulb to chain saw chassis.
    5. Remove bulb and replace with new vent tubes installed, connect to tubes to carb.
    6. Install new air filter and cover.
    7. Test purge bulb.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Hard to start and wouldn’t idle

    Randy - February 22, 2023
    Tool Type

    Chain Saw

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Needle nose pliers

    Replaced carburetor, wish is came with a gasket to the base. Had to take it back off and put a little sealer on it to get it to idle right. Also put new air cleaner on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Thread stripped on stud, fuel pipe leaking.

    Kevin - September 23, 2021
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, snips

    1. Removed stripped stud using vise grip pliers
    2. Installed new stud
    3. Removed leaking fuel tubing using needle nosed pliers
    4. Cut new tubing to proper length
    5. installed new tubing using needle nosed pliers
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Neglected tophandle saw needed some love

    Rhett - December 14, 2020
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Take off air cover and old broken oil cap installed new parts. Done
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    lost air cleaner cover and filter

    Ronald - June 2, 2019
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    replaced
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Old air filter and spark plug that needed to be replaced.

    Daniel - January 15, 2019
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Socket set

    Easy. Just took the cover off the filter which was really filled with nasty saw dust and oil/gas mix and cleaned it all and replaced with the new filter. Spark plug was and out and in job.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Starter handle was missing, saw handle cushion was broken, needed new air filter

    Jim - January 9, 2019
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Wrench Set, scribe hook

    1,Threaded rope thru new handle, tied knot, loaded spring, done.
    2.Removed saw handle, removed starter cover, removed old broken cushion mount and replaced with new one and reinstalled handle and starter cover.
    3, Unscrewed carburetor air filter cover and placed new air filter on carburetor and replaced cover.
    4, Started saw, runs great .
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Chain saw was running poorly. Short burst then stalled.

    Bryan - September 26, 2018
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Wrench Set, Paint can top remover

    Replaced air filter, fuel filter and spark plug. Had a flange nut that was missing so I replaced that as well. After this tune up the chain saw worked extremely well, pretty much like new. Took all of 10 minutes.

    Figured out that the tool that you get to remove paint can tops is perfect for fishing out the fuel filter.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Missing.

    Albert - November 5, 2017
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Installed the new filter and the cover. Screwed it tight.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal