Easy
Less than 15 minutes
This OEM part is sourced directly from Mr. Coffee for use with a variety of coffee makers. This listing is for one flexible rubbery piece. It is designed to press into the pre-made holes on the base of the machine, allowing grip during button presses while also protecting the surfaces beneath the machine.
• Note that this listing is for one individual foot.
Feet, Dr Series, Gry 117325002000
OEM part for: Mr. Coffee, Oster
Part Number: 117325002000
$4.99
In Stock
Ships within 1 business day 
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 29 machines
Mr. Coffee
CG12 Coffee Maker View Diagrams & Manuals
CGX20 Coffee Maker View Diagrams & Manuals
DR12 Coffee Maker View Diagrams & Manuals
DR13 Coffee Maker View Diagrams & Manuals
DRX20 Coffee Maker View Diagrams & Manuals
DRX23 Coffee Maker View Diagrams & Manuals
RM13 Coffee Maker View Diagrams & Manuals
DRX26 Coffee Maker View Diagrams & Manuals
CG13 Coffee Maker View Diagrams & Manuals
DW12 Coffee Maker View Diagrams & Manuals
DW13 Coffee Maker View Diagrams & Manuals
DWX20 Coffee Maker View Diagrams & Manuals
DWX23 Coffee Maker View Diagrams & Manuals
FTTX95 Coffee Maker View Diagrams & Manuals
FTX41 Coffee Maker View Diagrams & Manuals
FTX43 Coffee Maker View Diagrams & Manuals
FTX49 Coffee Maker View Diagrams & Manuals
FTXSS43 Coffee Maker View Diagrams & Manuals
ISX43 Coffee Maker View Diagrams & Manuals
ISX46 Coffee Maker View Diagrams & Manuals
SK12 Coffee Maker View Diagrams & Manuals
SKX20 Coffee Maker View Diagrams & Manuals
SKX23 Coffee Maker View Diagrams & Manuals
SKX26 Coffee Maker View Diagrams & Manuals
FTX33 Coffee Maker View Diagrams & Manuals
ISTX95 Coffee Maker View Diagrams & Manuals
TFX26 Coffee Maker View Diagrams & Manuals
FTXSS43GTF-1NP 12 Cup Coffee Maker View Diagrams & Manuals
FTTX951 Mrc Cofmkr 10Cu Th Pp Blk View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Coffee Maker Parts
This part replaces obsolete part #: 17325-002-000
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Feet to large
The feet are too large for the holes. Had to put in back, but the machine now leans forward.
Guest -
July 21, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Feet, Dr Series, Gry
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The heating plate dropped down because the plastic ring holding it up disintegrated
Theodore - October 18, 2019
Tool Type
Coffee Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
1) Remove screws holding the base to the coffeemaker.
2) Remove base.
3) Remove the two screws holding the bracket that secures the heating element to the heating plate.
4) Remove the bracket.
5) Lift up heating element to gain access to the plate.
6) Remove plate.
7) Remove old disintegrating plastic "ring" and "seal" - a large silicone (?) washer that fits between the "ring" and the heating "plate."
8) Installed new ring. It was a snug fit, ensure it get fully seated before going further.
9) Install old seal.
10) Install old plate.
11) Set heating element back in place.
12) Install old bracket and screws, being mindful to not pinch any electrical wires.
13) While bottom cover is off, remove any old feet that are still attached.
14) Install new feet by pulling them through holes with pliers while pushing with thumb.
15) Fit bottom cover and install screws.
16) Test the coffeemaker.
2) Remove base.
3) Remove the two screws holding the bracket that secures the heating element to the heating plate.
4) Remove the bracket.
5) Lift up heating element to gain access to the plate.
6) Remove plate.
7) Remove old disintegrating plastic "ring" and "seal" - a large silicone (?) washer that fits between the "ring" and the heating "plate."
8) Installed new ring. It was a snug fit, ensure it get fully seated before going further.
9) Install old seal.
10) Install old plate.
11) Set heating element back in place.
12) Install old bracket and screws, being mindful to not pinch any electrical wires.
13) While bottom cover is off, remove any old feet that are still attached.
14) Install new feet by pulling them through holes with pliers while pushing with thumb.
15) Fit bottom cover and install screws.
16) Test the coffeemaker.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
