Abrasive Inboard Fastener 21-1172
OEM part for: Jet
Part Number: 21-1172
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 6 machines
Jet
This item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Abrasive Inboard Fastener
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The part to grip the abrasive broke
Tool Type
Sander
Difficulty
Hard
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Nutdriver
Parts Used
Ordering and receiving the replacement part was a breeze.
Jeff
Inboard fastener broke
Tool Type
Sander
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Aluminum rivet on the inboard abrasive fastner broke
Tool Type
Sander
Difficulty
Hard
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Scew extractor
Parts Used
2. Remove old unit noting orientation and position
3.Bend new unit inside and try to align the hole on the fastner unit to the hole in the drum. This is the most frustrating part as there is little room to work with.
4. Secure new unit with screw and nut.
I broke the inboard fastener on my Jet drum sander so I had to replace it. Getting a replacement from Ereplacement parts was simple and cheap.
Tool Type
Sander
Difficulty
Hard
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Spring broke on inboard abrasive fastener
Tool Type
Sander
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
The most difficult part of repair was collapsing the spring while attaching with lock nut and screw. I used a 90 degree pliers to hold lock nut while collapsing the spring. Overall repair went well.
Inboard fastener became to weak to hold the paper.
Tool Type
Sander
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Wrench Set
Secure the motor.
Remove philips head screw. If stripped, which it probably will be, drill it out and replace with the new one.
Align and install.
This tool design is not very good. The inboard fastener spring weakens easily, is a pain in the ass to install that end of the paper, and a bigger pain to replace. Not hard, just tedious, unless you have the hands of a child.
nothing
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Paper fastener was broken
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, 90 degree needle nose plier
Parts Used
Broke the fastener trying to use the holding tool
Tool Type
Sander
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
Parts Used
Broke springs on fasteners
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.