Product Information
Description:
This is an authentic Ridgid replacement part that has been sourced from the original manufacturer to be used with impact drivers. The durable plastic end cap is used to cover the back of the main housing and motor assembly. A torx driver is needed to install this item. The end cap is sold as an individual replacement part. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Impact Driver
Questions & Answers for End Cap
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Impact Driver
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Allen rench
housing was broken a lot
the driver was was broken so bad it was duct taped together ! a friend gave it to me for parts !
so i ordered the housing and endcap rubber cover < just remove the 3 ft of duct tape then the screws ,
remove the cracked housing and replace with the new housing, simple and easy works like a new
one .took little under 15 min.
so i ordered the housing and endcap rubber cover < just remove the 3 ft of duct tape then the screws ,
remove the cracked housing and replace with the new housing, simple and easy works like a new
one .took little under 15 min.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Soldering iron
Wear due to heavy use in a professional environment
Removed all screws
Disassembled the case
Removed the switch and trigger assembly
Desoldered motor wires from trigger
Disassembled motor and gear case
Reassemble gear case and new motor
Soldered wires to switch
Reassemble unit in new case
Applied new sticker
Disassembled the case
Removed the switch and trigger assembly
Desoldered motor wires from trigger
Disassembled motor and gear case
Reassemble gear case and new motor
Soldered wires to switch
Reassemble unit in new case
Applied new sticker
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information