Product Information
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Vacuum
Questions & Answers for Emtor (1cr And 3cb)
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Zip ties and scissors
25 year old Kirby had holes in fill tube and bag connector, debris spewed everywhere!
The most difficult part of this repair was getting the old connector off of the bag. The fill tube came off easily with scissors to the zip tie. Once I figured out HOW to get the bag off the connector, the rest was a piece of cake. No more dust blowing EVERYWHERE!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, wire cutters
emtor was broke where it attached to the vacuum
1. remove the emtor and bad holder from vacuum.
2. remove emtor from bag holder.
3. remove bag fill tub from emtor.
4. remove bag fill tub from top elbow that goes into bag.
5. assembly in reverse order.
2. remove emtor from bag holder.
3. remove bag fill tub from emtor.
4. remove bag fill tub from top elbow that goes into bag.
5. assembly in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information