This is a Genuine Manufacturer Sourced replacement part used on some Fein Multi Master Oscillating Tools. This item is Sold Individually. Switches are commonly replaced parts in power tools, handling on/off and variable speed operations and is 100-120 volts. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.
Speed Control Switch 30762412990
OEM part for: Fein
Part Number: 30762412990
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 10 machines
Fein
This item works with the following types of products:
- Multi-Tool Parts
This part replaces obsolete part #: 30762383990, 30762281990
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Speed Control Switch
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bad electronic switch
Tool Type
MultiTool
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Switch didn't work
Tool Type
Oscillating Tool
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Star bit
Parts Used
Variable speed control stopped working
Tool Type
Oscillating Tool
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
2. Remove 1 screw holding down the power cord strain relief sleeve.
3. Lift out variable speed control unit and remove all the wires from the old switch.
4. Blow out the interior with an air gun to remove sawdust and debris.
5. Attach wires to the new switch and return to the tool body. Take note that the on/off switch on the controller is in sync with the black on/off slide switch on the top of the Fein tool. Reinstall plastic clamp that holdsdown strain relief with 1 screw.
6. Make sure that all wires are routed properly to avoid pinching them and reassemble back cover and tighten screws.
7. ALL DONE!
Would not turn on
Tool Type
Oscillating Tool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Air gun to clean out the dust
Parts Used
No power to the unit
Tool Type
MultiTool
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Variable speed control was broken.
Tool Type
Oscillating Tool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Wouldn't start
Tool Type
Oscillating Tool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Speed controller failed, ni variability
Tool Type
Oscillating Tool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, T15 driver
Parts Used
2, Loosen & remove the wire clamp on the AC cord.
3, IMPORTANT: Flip the loosened speed controller over so you can see the wires & take a picture to show the wiring diagram. It is not readily apparent what goes where on the speed controller.
4, Loosen/remove all wires from the failed speed controller & attach the wires to the new speed controller in the same way.
5, Re clamp down the AC cord.
6, Re install the cover using the 3 screws removed earlier.
Speed control switch failed and that allowed only one speed for tool to operate in.
Tool Type
Oscillating Tool
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Speed control failure
Tool Type
Oscillating Tool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hex wrench
Parts Used
Remove wire clips from speed control
Replace speed control
Attach wires
Replace cover
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.