Medium
15-30 minutes
This edge guide is an OEM direct from DeWALT. The metal component is designed for use with lawn edger devices. The edge guide is fastened to the blade guard, allowing the operator to safely make accurate lawn edging. A screwdriver, socket set and a pair of pliers may be required for the installation. The edge guide is sold individually.
Edge Guide 244276-00
OEM part for: DeWALT, Black and Decker
Part Number: 244276-00
$5.82
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 8 machines
DeWALT
Black and Decker
LE750 Type 1 EDGE HOG 2-in-1 Landscape Edger View Diagrams & Manuals
LE750 Type 2 EDGE HOG 2-in-1 Landscape Edger View Diagrams & Manuals
LE750 Type 3 EDGE HOG 2-in-1 Landscape Edger View Diagrams & Manuals
LE750 Type 4 EDGE HOG 2-in-1 Landscape Edger View Diagrams & Manuals
LE750 Type 5 Edge Hog View Diagrams & Manuals
EH1000 Type 5 12 AMP Lawn Edger View Diagrams & Manuals
79654 (Type 1) Edger Power Tool View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Edger Parts
- Grass Trimmer Parts
- Trimmer Parts
This part replaces obsolete part #: 243335-00
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Edger guide replacement
Like new part- easy to reinstall and get edging the lawn again. Quick delivery, too!
Guest -
October 12, 2021
Verified Purchase
Fast and great price
I was impressed with which the speed that I received the product and was very impressed with the low price as well. I will look to them again in the future when I need parts.
Guest -
June 12, 2021
Verified Purchase
Reasonably priced parts
Our part was shipped immediately and made a huge difference when we installed it on our edger. Thank you!
Guest -
October 5, 2020
Verified Purchase
Easy repair, great service and quality
the blade was wore down really bad. Ordered a replacement. It is just like new. Edging is smooth and easy again
Guest -
June 30, 2020
Verified Purchase
Satisfied
This was the part I needed. An easy search and fast delivery.
William J -
May 18, 2020
Verified Purchase
Hard to Find!
I've been looking for this part for a while. Glad to find it even at a reasonable price!
Randy -
July 20, 2019
Verified Purchase
Arrived On-Time
The part appears to be correct for my edger but I have not installed it. The original part is still serviceable. I purchased this one as back-up when the original one no longer functions satisfactorily.
Spencer -
July 8, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Edge Guide
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Edge guide and blade was worn out
John - September 26, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
1. Removed blade.
2. Removed edge guide.
3. Installed new edge guide.
4. Installed new blade
2. Removed edge guide.
3. Installed new edge guide.
4. Installed new blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Edge guide & front wheel worn out.
David - July 15, 2023
Tool Type
Edger
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set, snap ring pliers
Parts Used
1. Removed the blade. Used vice grips to hold blade while using socket set to remove nut holding blade in place.
2. Used snap ring pliers to remove the snap ring holding in the edge guide.
3. Removed the blade housing so I could remove the bolt that holds in the front wheel.
4. Assembled front wheel.
5. Put blade housing back in place.
6. Installed new edge guide.
7. Used snap ring pliers to install snap ring to hold edge guide in place.
8. Put the blade back on. Used vice grips to hold the blade while I tightened the nut holding it in place with socket set.
2. Used snap ring pliers to remove the snap ring holding in the edge guide.
3. Removed the blade housing so I could remove the bolt that holds in the front wheel.
4. Assembled front wheel.
5. Put blade housing back in place.
6. Installed new edge guide.
7. Used snap ring pliers to install snap ring to hold edge guide in place.
8. Put the blade back on. Used vice grips to hold the blade while I tightened the nut holding it in place with socket set.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Edge guide and blade just wore out through seasonal use.
Dennis - November 29, 2020
Tool Type
Hedge Trimmer
Difficulty
Expert
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed blade and spring ring with screw driver and pliers replaced guide and blade in less then 15 minutes do this at the end of each mowing season.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
parts wore out.
walter - June 7, 2019
Tool Type
Grass Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Adjustable Wrench
took it apart, and put it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The edge guide & blade just wore out.
Dennis - December 18, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Took off spring clip for guide and removed part put new one on and replaced clip. Blade took off bolt and washer assembly put new blade on and replaced washers and bolt. That's it Have done this many times before.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade was worn out
Richard - May 14, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
-Disconnected unit from electric outlet
-Removed blade holding lock nut & blade
-Removed guide holding expansion ring & guide
-Reassembled unit with replacement parts
-Removed blade holding lock nut & blade
-Removed guide holding expansion ring & guide
-Reassembled unit with replacement parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rear bearing in the motor failed causing a lot of racket and poor performance
John - April 29, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, impact wrench with torx bits
Disassembled the housing and removed the motor housing. Tapped the old bearing off of the motor shaft. I then replaced the brush holders with new as a maintenance item. I then replaced the blade and edge guide during the rest of the reassembly process. It all went well and since I cleaned everything up as I went, the edger now looks and runs as good as new. The whole process was facilitated by the exploded part view shown on the ereplacement parts website.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn parts
ANTHONT - August 7, 2016
Tool Type
Trimmer
Difficulty
Hard
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Locked old blade in place with screw driver placed in hole in blade. Used socket set to remove nut holding blade on. Removed blade. Removed c clip with screw driver that holds edge guide in place. Removed edge guide. Put on new edge guide. Struggled to replace c clip back. Put on washer then new blade then another washer. Screwed on nut. Put screw driver in hole in new blade to stop it from moving and tightened it good.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
replace worn wheel and guide
John - November 11, 2015
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
Parts Used
Remove hub cap from front wheel, remove bolt from center of wheel , replace new wheel. Removed worn edge guide from blade guard and replaced with new one. Simple repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Edge guide was worn and so was the blade.
Michael - April 25, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Grass Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Adjustable Wrench
Parts Used
1. Removed the old blade, the guide.
2. Installed new guide and blade
2. Installed new guide and blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
