Product Information
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Rotary Hammer
Questions & Answers for Dust Seal Svc 5426-21
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Rotary Hammer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Rubber mallet, bearing puller
Seal worn out
Remove the handle halves, Remove the cord clamp. Take a picture of the internal parts and where they go. Remove the bottom cap. Then remove the screws from the motor housing. Tap on the housing with a rubber mallet to remove it. The field should come out with the motor housing.Then remove the rubber sleeve, magnetic disc, and the bearing.( I used a bearing puller to remove the bearing). Then remove the seal and replace it with the new one. Check all the other parts for wear and tear. Put the tool back together in the reverse order that you tore it down. Good luck1
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information