Product Information
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Sander
Questions & Answers for Belt Follower
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Sander
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Power Drill, Socket set
Driven pulley would back off of the threaded shaft somehow
1. Removed the old pulley and spring washer
2. Replaced them with the new ones
3. Used the Power drill and a socket to tighten the pulley
4. Used the clutch on the drill in a very low position to create sort of an impact wrench drive for tightening the pulley on
5. Replaced Belt
2. Replaced them with the new ones
3. Used the Power drill and a socket to tighten the pulley
4. Used the clutch on the drill in a very low position to create sort of an impact wrench drive for tightening the pulley on
5. Replaced Belt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information