Product Information
Description:
This replacement cylinder o-ring is a high quality item that is supplied by original equipment manufacturer for use with Hitachi nailers. It is designed to provide an air-tight seal for the cylinder. Please note one durable rubber o-ring is included per order. |
Frequently Purchased With
Compatibility
the 22 compatible machines
This part is compatible with the following machines:
Metabo HPT (Hitachi)
NR83AA3 Clipped Head Framing Nailer
NV65AC Coil Pallet Nailer
NV83A2 Full Round Head Coil Nailer
NR83A2(S) Framing Nailer, Full Head, Plastic Strip Collation (without Depth Adjustment)
83AA2 Strip Nailer
NR83A 3-1/4" Full Head Nailer
NR83AA 3-1/4" Clipped head Framing Nailer
NR83AA2 3-1/4" Clipped head Framing Nailer
NV65AA Nailer
NV75A Nailer
NV83A 3-1/4" Full Head, Framing Coil Nailer
NV65AC Coil Pallet Nailer
NV83A2 Full Round Head Coil Nailer
NR83A2(S) Framing Nailer, Full Head, Plastic Strip Collation (without Depth Adjustment)
83AA2 Strip Nailer
NR83A 3-1/4" Full Head Nailer
NR83AA 3-1/4" Clipped head Framing Nailer
NR83AA2 3-1/4" Clipped head Framing Nailer
NV65AA Nailer
NV75A Nailer
NV83A 3-1/4" Full Head, Framing Coil Nailer
NV83A3 Nailer
NV83A18 Nailer
NR83A2 Strip Nailer
NR83A5 Strip Nailer
NR83A5(S)M 3-1/4 Inch Rnd Head Framing Nailer W/Out Depth Adjustment
NR83A5M 3-1/4 Inch Rnd Head Framing Nailer W/ Depth Adjustment
NR83AA5M 3-1/4 Inch Clipped Head Fram Nailer Accepts Paper Tape Collated Nails
NV83A5M 3-1/4 Inch Coil Framing Nailer 2 Inch-3-1/4 Inch X 0.099 Inch-0.131 Inch
NR83A2(Y) Nailer
NR83A5(S) Nailer
NR83AA5 Nailer
NV83A18 Nailer
NR83A2 Strip Nailer
NR83A5 Strip Nailer
NR83A5(S)M 3-1/4 Inch Rnd Head Framing Nailer W/Out Depth Adjustment
NR83A5M 3-1/4 Inch Rnd Head Framing Nailer W/ Depth Adjustment
NR83AA5M 3-1/4 Inch Clipped Head Fram Nailer Accepts Paper Tape Collated Nails
NV83A5M 3-1/4 Inch Coil Framing Nailer 2 Inch-3-1/4 Inch X 0.099 Inch-0.131 Inch
NR83A2(Y) Nailer
NR83A5(S) Nailer
NR83AA5 Nailer
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Cylinder O-ring (i.d 79.3)
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set, Nutdriver, picks for \\\'O\\\' rings
leaks air at top and double fire
1. removed top and replaced head cap and gasket
2. Removed cylinder and replaced 'O' rings
3. removed nose and replaced gasket and piston bumper
4. Cylinder plate did not come out easily but other than that repair went well
2. Removed cylinder and replaced 'O' rings
3. removed nose and replaced gasket and piston bumper
4. Cylinder plate did not come out easily but other than that repair went well
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Allen wrench
Leak too much air,
Removed the four screws from the top cover
Looked to see what parts I would need to fix the leak.
I ordered about every o-ring and seal in the gun
Replaced all that I ordered
The gun is like new again
Looked to see what parts I would need to fix the leak.
I ordered about every o-ring and seal in the gun
Replaced all that I ordered
The gun is like new again
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information