Product Information
Description:
This is an authentic OEM sourced component which is specially made for use with Kawasaki engines commonly installed on lawn and garden equipment. The part provides an identical replacement for a missing or a faulty c-ring that was installed on a new unit. This high-quality hardware is utilized to secure the block, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this c-ring. Keep in mind this high-quality part is made of durable metal and is sold individually. |
Frequently Purchased With
Compatibility
the 17 compatible machines
This part is compatible with the following machines:
Ryobi
RTS10 10" Table Saw
RTS10 10" Table Saw
RTS21 10 in. Table Saw
RTS21 10 in. Table Saw
RTS21G RTS21G 10-In. Table Saw
RTS21G RTS21G 10-In. Table Saw
RTS10G 10-Inch Table Saw
RTS22 10-Inch Table Saw
RTS10 10" Table Saw
RTS21 10 in. Table Saw
RTS21 10 in. Table Saw
RTS21G RTS21G 10-In. Table Saw
RTS21G RTS21G 10-In. Table Saw
RTS10G 10-Inch Table Saw
RTS22 10-Inch Table Saw
RTS22T 10-Inch Table Saw
RTS10NS 10-Inch Table Saw
RTS11 10-Inch Table Saw
RTS12 Rts12 10 In. Table Saw 2-24-21 (Rev:04)
RTS12T Rts12t 10 In. Table Saw 2-24-21 (Rev:04)
RTS23 Rts23 10 In. Table Saw 2-24-21 (Rev:04)
RTS23T Rts23t 10 In. Table Saw 2-24-21 (Rev:04)
RTS10NS 10-Inch Table Saw
RTS11 10-Inch Table Saw
RTS12 Rts12 10 In. Table Saw 2-24-21 (Rev:04)
RTS12T Rts12t 10 In. Table Saw 2-24-21 (Rev:04)
RTS23 Rts23 10 In. Table Saw 2-24-21 (Rev:04)
RTS23T Rts23t 10 In. Table Saw 2-24-21 (Rev:04)
Ridgid
Products Compatibility
This item works with the following types of products:
- • Saw
- • Table Saw
Questions & Answers for C-ring
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Adjustable Wrench, C-ring pliers
Blade wouldn't raise or lower - elevation screw was stripped, the block nut was also stripped and damaged the screw.
There are two jam nuts on the screw shaft that were seriously jammed! Tried all my wrenches, lock pliers, and wishful thinking to get them loose. Finally I got my oscillating saw with metal blade and cut the shaft in two places to remove the segment with the two jam nuts. Then put one nut in my metal vise and used an adjustable wrench on the other jam nut. That worked. But the nuts were cornered by all that work so I sent in a second order to get two nuts. There's a teeny c-ring on the end of the shaft and I used a cold chisel to break it off since I didn't have the c-ring pliers yet. All of this was the 1.5 hours of the work. Once I got the parts from eReplacementParts and the c-ring pliers took 30 minutes to fix everything. To be on the safe side I ordered a second set of screw shaft and block nut in case I need another fix.
The parts from eReplacementParts got here quickly (I used USPS), they were reasonably priced. And they worked. Thanks to them I didn't have to buy a new table saw.
The parts from eReplacementParts got here quickly (I used USPS), they were reasonably priced. And they worked. Thanks to them I didn't have to buy a new table saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information