Easy
15-30 minutes
This replacement cord is specially produced for Milwaukee power tools. This item is supplied directly from original equipment manufacturer. The purpose of a power cord is to deliver electricity from an outlet to the tool. This cord is rubber insulated and it is sold individually. Please note, the protector/grommet is sold separately.
Replacing this cord is simple task that should only require a screwdriver.
• Remove the housing screws
• Separate housing pieces
• Disconnect wires from the old cord
• Remove old cord and secure the new one
• Reassemble and test the unit
Cord Set (6-foot) 22-64-0076
OEM part for: Milwaukee
Part Number: 22-64-0076
$46.06
In Stock
Order within the next 10 hours and your part ships today! 
Jump To:
Product Description ?
- 14-3 Wire 6'
- Classification: Part
- Weight: 1.66 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 66 machines
Milwaukee
5243 (SER 663-1001) Grinder View Diagrams & Manuals
5263 (SER 690-1001) Grinder View Diagrams & Manuals
4201 (SER 498-1001) Medium Base Electromag Drill Press Stand View Diagrams & Manuals
4201 (SER 498-5500) Medium Base Electromag Drill Press Stand View Diagrams & Manuals
4201 (SER 498A) Medium Base Electromag Drill Press Stand View Diagrams & Manuals
4202 (SER 598-10475) Electromagnetic Drill Press Stand View Diagrams & Manuals
4202 (SER 598A) Electromagnetic Drill Press Stand View Diagrams & Manuals
4202 (SER 598B) Electromagnetic Drill Press Stand View Diagrams & Manuals
4202 (SER 598C) Electromagnetic Drill Press Stand View Diagrams & Manuals
4203 (SER 838B) Electromagnetic Drill Press Stand View Diagrams & Manuals
4221 (SER 499-1001) Large Base Electromag Drill Press Stand View Diagrams & Manuals
4221 (SER 499-3700) Large Base Electromag Drill Press Stand View Diagrams & Manuals
4221 (SER 499A) Large Base Electromag Drill Press Stand View Diagrams & Manuals
4231 (SER 500A) Adjustable Base Electromag Drill Press Stand View Diagrams & Manuals
6056 (SER 651-1001) Sander/Grinder View Diagrams & Manuals
6066 (SER 753-1001) Sander View Diagrams & Manuals
5330 (SER 477-3000) Rotary Hammer View Diagrams & Manuals
5332 (SER 623-1001) Rotary Hammer View Diagrams & Manuals
5332 (SER 623A) Rotary Hammer View Diagrams & Manuals
4203 (SER 838A) Drill Press View Diagrams & Manuals
2400-1 (SER 171-2086) Electric Drill / Driver View Diagrams & Manuals
2400-1 (SER 171-2536) Electric Drill / Driver View Diagrams & Manuals
6373 (SER 626-12931) Worm Drive Circular Saw View Diagrams & Manuals
6089 (SER 606-1001) Sander View Diagrams & Manuals
6115 (SER 671-1001) Sander/Grinder View Diagrams & Manuals
6460 (SER 607-1001) 10-1/4" Circular Saw View Diagrams & Manuals
6460 (SER 607-13143) 10-1/4" Circular Saw View Diagrams & Manuals
6460 (SER 607-18343) 10-1/4" Circular Saw View Diagrams & Manuals
6460 (SER 607-19104) 10-1/4" Circular Saw View Diagrams & Manuals
6460 (SER 607-3000) 10-1/4" Circular Saw View Diagrams & Manuals
6460 (SER 607A) 10-1/4" Circular Saw View Diagrams & Manuals
6460 (SER 607B) 10-1/4" Circular Saw View Diagrams & Manuals
6460 (SER 607C) 10-1/4" Circular Saw View Diagrams & Manuals
2400-1 (SER 171-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2400 (SER 163-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2500-1 (SER 172-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2500 (SER 167-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2600-1 (SER 173-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2600 (SER 168-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2700-1 (SER 174-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2700 (SER 169-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2800-1 (SER 175-1001) 1-1/4" Electric Drill View Diagrams & Manuals
2800 (SER 170-1001) 1-1/4" Electric Drill View Diagrams & Manuals
6095 (699-1001) 9" 5,000 RPM Sander View Diagrams & Manuals
4100 Drill Stand View Diagrams & Manuals
4110 Vac-U-Rig View Diagrams & Manuals
6056 (SER 452-27600) 9" Sander/Grinder View Diagrams & Manuals
6058 (SER 651-6401) 7" Sander/Grinder View Diagrams & Manuals
6058 (SER 610-1001) 7" Sander/Grinder View Diagrams & Manuals
6065 (SER 752-1001) 9" 5000 R.P.M. Sander View Diagrams & Manuals
6377 (SER 620-16000) 7-1/4" Worm Drive Circular Saw View Diagrams & Manuals
6377 (SER 620-27001) 7-1/4" Worm Drive Circular Saw View Diagrams & Manuals
6378 (SER 621-7000) 8-1/4" Worm Drive Circular Saw View Diagrams & Manuals
6082 (SER 535-1001) 9" Sander / Grinder View Diagrams & Manuals
6084 (SER 536-1001) 7" Sander / Grinder View Diagrams & Manuals
6086 (SER 537-1001) 9" Sander / Grinder View Diagrams & Manuals
6088 (SER 530-1001) 7" Sander / Grinder View Diagrams & Manuals
6090 (SER 668-1001) 7" Sander / Grinder View Diagrams & Manuals
6090 (SER 668-5001) 7" Sander / Grinder View Diagrams & Manuals
6096 (SER 717-1001) 9" Sander View Diagrams & Manuals
6102 (SER 538-1001) 9" Sander / Grinder View Diagrams & Manuals
6104 (SER 539-1001) 9" Sander / Grinder View Diagrams & Manuals
6108 (SER 655-1001) 9" Sander / Grinder View Diagrams & Manuals
6108 (SER 655-4001) 9" Sander / Grinder View Diagrams & Manuals
6150 (SER 595-1001) 12" Cut Off Machine View Diagrams & Manuals
6373 (SER 626-1001) 7-1/4" Worm Drive Circular Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Grinder Parts
- Drill Parts
- Drill Press Parts
- Sander Parts
- Rotary Hammer Parts
- Electric Drill Parts
- Circular Saw Parts
- Saw Parts
- Blower Parts
- Vacuum Parts
- Chop Saw Parts
This part replaces obsolete part #: 22-64-0075, 22-64-0070
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord Set (6-foot)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
tI’ve had grinder 45 years. Needed a cord and a tune-up. And some lil’ Polish!..
Michael - February 7, 2021
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wiring tools.. Wire stripper, wire cutters, wire crimpers.
Dis-assembled Handle. Btw always make sure it’s not plugged in First! Removed worn out wiring. Test fitted wire into handle. Trimmed and crimped new appropriate size connectors. Re-installed cord to handle. Re-attached handle to main body. Since I’m working on it, I removed the head and brushes to regrease the head and replaced brushes and inspect and clean stator... then a little 409 and a lil Polish, she looks brand new..... ready for another 45years!..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The power cord was broken near the magnet base.
Terry - April 18, 2020
Tool Type
Drill Press
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wire strippers/crimpers, screwdriver, hex wrench
Parts Used
1. I removed the control panel, 4 screws.
2. I removed the 4 hex screws from the magnet base.
3. I removed the grounding screw and the 2 screws that hold the special power cord in place.
4. I unplugged the black and red wires from the circuit board and pulled the cord out and away.
5. I used the old cord to help me to know how long the three wires would need to be as I put the new spade connectors on the red and black wires and the eyelet on the green wire.
6. Once this was completed I just reversed the process to put it back together.
2. I removed the 4 hex screws from the magnet base.
3. I removed the grounding screw and the 2 screws that hold the special power cord in place.
4. I unplugged the black and red wires from the circuit board and pulled the cord out and away.
5. I used the old cord to help me to know how long the three wires would need to be as I put the new spade connectors on the red and black wires and the eyelet on the green wire.
6. Once this was completed I just reversed the process to put it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed new power cord
Robert - February 28, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, wire cutters and crimpers
Parts Used
Take saw handle apart. Recognize connections before removing old cord. Install new cord identical manner-make certain that indents on inner handle catch the collar on cord that fixes it to saw. Voila! Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord was old and showing wiring.
luis - November 26, 2016
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Remove the switch handle half
Remove the cord wires from the switch, remove the old cord
Connect the new cord wires to the switch
Attach the switch and the switch handle half to the saw
Remove the cord wires from the switch, remove the old cord
Connect the new cord wires to the switch
Attach the switch and the switch handle half to the saw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord was old and coming apart
Robert - September 12, 2016
Tool Type
Drill Press
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Took the base off, took the wires loose, and pulled the cord out. Reversed the procedure to install.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
