Easy
Less than 15 minutes
This piece is a genuine replacement part made by the original manufacturer. It is compatible with Milwaukee angle grinders. Located at the connection point between the power cord and the machine, it protects the cord from strain and damage. Damaged cords should be replaced. This item is sold individually. Replacement cords are sold separately.
• Disconnect tool from power source
• Remove the outer case
• Disconnect cord/wires from tool
• Pull cord through the cord protector
• Reconnect wires
• Reassemble and test out tool
Cord Protector 44-76-0095
OEM part for: Milwaukee
Part Number: 44-76-0095
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 17 machines
Milwaukee
6146-30 (D02A) 4.5" Compact Angle Grinder View Diagrams & Manuals
6117-30 (C91A) 5" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6117-31 (C92A) 5" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6117-33 (C94A) 5" HP Angle Grinder With Slide Switch View Diagrams & Manuals
6117-33D (C95A) 5" HP Angle Grinder With Slide Switch View Diagrams & Manuals
6121-30 (C96A) 4.5" Compact Rat-Tail Angle Grinder View Diagrams & Manuals
6121-31 (C97A) 4.5" Compact Rat-Tail Angle Grinder View Diagrams & Manuals
6121-31A (C98A) 5" Compact Rat-Tail Angle Grinder View Diagrams & Manuals
6124-30 (C99A) 6" HP Rat-Tail Angle Grinder View Diagrams & Manuals
6124-31 (D01A) 6" HP Rat-Tail Angle Grinder View Diagrams & Manuals
6146-31 (D03A) 4.5" Compact Angle Grinder With Paddle Switch View Diagrams & Manuals
6146-33 (D04A) 4.5" Compact Angle Grinder With Slide Switch View Diagrams & Manuals
6147-30 (D05A) 4.5" Compact Angle Grinder With Paddle Switch View Diagrams & Manuals
6147-31 (D06A) 4.5" Compact Angle Grinder With Paddle Switch View Diagrams & Manuals
6161-30 (D07A) 6" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6161-31 (D08A) 6" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6161-33 (D09A) 6" HP Angle Grinder With Slide Switch View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Grinder Parts
Repair Videos ?
Watch the Repair Video for
Cord Protector
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord Protector
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Power cord had cut in it.
Wayne - October 24, 2017
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the rear housing and noted where all of the parts were located. Disconnected the cord from the switch .Slid the cord protector on the new cord. Connected the new cord to the switch. Made sure all the parts were in their place and screwed the housing together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn out pads on palm sanders, bad cords on angle grinders
Sean - January 23, 2017
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Torx
Took screws out of sander pads and replaced. Removed cut cords from angle grinders installed new cords with protectors.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed a new cord and relief
matthew - June 20, 2016
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx T-20 bit
Remove the rear housing of the grinder. And make a wiring diagram and take a few picture of where the parts inside are located, especially the springs. Remove the cord from the switch. Slide the new cord relief onto the new cord. If want to use terminals on the cord you can get those locally, the cord does not come with them. Attach the cord the the switch. Make sure all of the parts are in the correct place, then put the rear housing back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
