Stand Mixer Speed Control Plat - WPW10119326:KitchenAid

Grid squares measure 1x1 inch

Watch The
Repair Video

Stand Mixer Speed Control Plat WPW10119326

Part Number: WPW10119326

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: W10119326, 2409042, 4176137, 240904-2 and 4162402.

Product Information

Description:

This is a genuine KitchenAid replacement part designed for use with KitchenAid stand mixers. Speed control plate controls both the speed of the mixer and it’s on/off function. The speed control is located at the rear of the mixer, and is visible once the mixer end cover is removed. The speed control has a screw located at the bottom that holds it in place, and also two speed adjustment spring loaded screws on the top. This plate is made out of plastic with metal and it is sold individually. To replace it you would need a screwdriver.

Warning: California's Proposition 65

Frequently Purchased With

Grinder Stand ..
$24.85

Stand Mixer Mo..
$8.53

Governor
$20.38

Stand Mixer Sp..
$10.00

Seal
$7.47

Gasket
$20.99

Worm Gear
$35.17

Compatibility

This part is compatible with the following machines:

KitchenAid

Whirlpool

KSMC50S-1

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Mixer

Questions & Answers for Stand Mixer Speed Control Plat

Sort by

Our mixer is an old one and we cherish it! K45 is all I know except for a small sticker underneath with the numbers 10977 printed on it. The speed control now only has 2 speeds working and off. Will this part fit our old K45 mixer? Thanks Art S. in FL

Art for model number K45 asked on 2023-12-15

Hi Art, Thank you for your question. This would be the correct part for your mixer. We hope this helps!

is this speed control plate for the ksm90 mixer?

john for model number ksm90 asked on 2023-03-04

Hi John, Thank you for your question. Yes, this would be the correct control plate for your mixer. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!

What is the best shipping option than $10.00?

Bhaskaranand for model number KSM90.....control board asked on 2022-05-18

Hello Bhaskaranand, Thank you for writing. All shipping options are provided on the site once the shipping zip code is entered. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Will this fit on my machine? Only 2 of the speeds work. Would it be this or the Phase control ?

Carl for model number KSM90 asked on 2022-04-24

Hello Carl, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. It could be either of these parts that is causing your issue, or the governor. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Related Parts: Grinder Stand Mixer Speed Cont Governor

Our mixer's speed control/power switch stopped working. It is great machine I feel overall, just surprised with very minimal use this would happen. Is there a solution to this?

Will for model number KSM95ER0 asked on 2022-03-29

Hi Will, Thank you for your question. The part number listed under your model number for the control plate is WPW10119326. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Related Parts: Stand Mixer Speed Control Plat

Repair Instructions: Submitted by Customers Like You

11 of 11 people found this instruction helpful

Tool Type:

Mixer

Parts Used:

Stand Mixer Speed Control Plat - WPW10119326

Grinder Stand Mixer Speed Cont - WPW10325124

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, a peace of string so you dont loose spring that holds bord i

Mixer did not work

Phase control board was easy, The control plate took some time to adjust to get all speeds to work. It seems that you have to adjust top left screw to adjust slow speed first and than the right screw for speed. The bottom screw has to be just right for shut off and on. I noticed if you just put control in it doesn't work, it has to be adjusted

Did you find this story helpful?

Thanks for voting and helping fellow customers!

10 of 10 people found this instruction helpful

Tool Type:

Mixer

Parts Used:

Stand Mixer Speed Control Plat - WPW10119326

Stand Mixer Motor Brush - WPW10380496

Grinder Stand Mixer Speed Cont - WPW10325124

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, mallet

Mixer would not turn on.

Research how to videos. Decided problem was probably the phase control board, but in the interest of time and since the additional parts did not cost much, I also replaced the control plate and motor brushes. Note, the control plate is attached by three screws, two of which are spring loaded. Hence, their adjustment is critical. I took close in photos of their extension or placement using a ruler so I could ensure correct reinstallation of the the replacement plate.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

6 of 6 people found this instruction helpful

Tool Type:

Mixer

Parts Used:

Link-speed - W11266439

Stand Mixer Speed Control Plat - WPW10119326

Governor - WPW10330804

Spring - WP240205

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers

No low speed on the mixer. It was off or fast

Removed and replaced the governor and control plate. Then adjusted the control plate screws to get a smooth slow first speed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Mixer

Parts Used:

Stand Mixer Speed Control Plat - WPW10119326

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers

Mixer not running consistent when switched on and toggling between speeds. Very erratic.

Removed rear cover to access old plate. Disconnected retention spring and temporarily hooked it to part of the chassis. One by one, removed wires from the old plate and connected them to the new plate. Removed 2 screws holding the old plate in place and installed new plate. Connected retention spring. Adjusted screw on plate bottom to make the mixer switch off at the right switch position. Reinstalled cover plate. Mixer now works perfect!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Stand Mixer Speed Control Plat - WPW10119326

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Broken control plate

I took the blender a part, removed the broken plate and replaced for the new one

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Worm Gear - WP240309-2

Stand Mixer Speed Control Plat - WPW10119326

Stand Mixer Motor Brush - WPW10380496

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Adjustable Wrench

Flooded Mixer

Most people would not try and repair this old mixer, but it was the first gift I gave my wife for our new home. We flooded in Harvey, and the mixer sat under 4 foot of water for 10 days. I cleaned it, dried it and it ran, but I could tell it needed attention. I put all new electrical parts inside and it runs, but I need to set the speed and switch positions. Balancing the settings is the hardest part of the rebuild.

thanks,

Craig

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Stand Mixer Speed Control Plat - WPW10119326

Seal - WP240775-1

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Wrench Set

Mixer speed control contacts burned.

Removed the end cap, removed the gasket, disconnected the wires from the speed control, removed the speed control, replaced the speed control with the new part, put the wires back in place, adjusted the speed control, put the gasket and the end cap back in place, checked the operation.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Stand Mixer Speed Control Plat - WPW10119326

Seal - WP240775-1

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Broke.

Replace parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information