Product Information
Description:
| Genuine OEM replacement part used on Bosch Demolition/Brute Hammers. This is a Metal Spring and it is Sold Individually. This Spring is attached to Tool Holder with a Microencapsulated Screw. Over time springs may loose its tension and may not function as intended. If this part is lost or damaged it must be replaced. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Demolition Hammer
- • Drill
- • Hammer Drill
Questions & Answers for Compression Spring
How long is this bolt?
Mike
for model number 2914550034
asked on 2023-05-17
Hi Mike,
Thank you for your question. The bolt measures approximately 4.75 inches. We hope this helps!
eReplacementParts Team May 17, 2023
How long is this spring?
Mike
for model number 3614640501
asked on 2023-05-17
Hi Mike,
Thank you for your question. The spring is approximately 2.5 inches. We hope this helps!
eReplacementParts Team May 17, 2023
Repair Instructions: Submitted by Customers Like You
Tool Type:
Demolition Hammer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Jackhammer stopped working
1) Diagnosed switch was bad and brushes needed replacement
2) Replaced switch and brushes
3) Got back to work
2) Replaced switch and brushes
3) Got back to work
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Expert
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set, 1/2\\
Bolt broke off down in the casting
Drilled a hole in the broken bolt and tried to use an easy out which broke off in the hole. So then I mig welded a nut to the bolt and twisted it out with a 3/4" wrench. It took 3 tries before I got a strong enough weld to do the trick. If the casting hadn't been aluminum the welding trick probably wouldn't have worked. Put it all back together and it works as designed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Normal wear and tear/broken bolt.
Removed and replaced the parts, due to wear
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Spring bolt broke
Put the disc spring on the bolt first then the spring, apply Loctite 222 on the bolt
Start threading them into the tool holder, alternating screwing them in
Start threading them into the tool holder, alternating screwing them in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Quick Turnaround
Thanks for sending parts to my repairman. Got my machine up and running and back into my fleet. Always use you for electrical unit parts
ROBERT -
September 6, 2023
Verified Purchase
Right one.
Took awhile but is right.
Guest -
August 1, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
