The plastic catch attaches to the spring and the motor housing and helps to join together both sides of the motor housing. This is an OEM replacement part that is used in Black and Decker blower vacs and leaf hogs. A screwdriver may be needed when replacing this part which is available individually.
Catch 370012
OEM part for: DeWALT, Black and Decker
Part Number: 370012
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 8 machines
Black and Decker
This item works with the following types of products:
- Blower Parts
This part replaces obsolete part #: 370012-00
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Catch
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Latch that holds vacuum tube to motor assembly broke
Tool Type
Vacuum
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, none
Parts Used
I dropped the blower and the Catch broke.
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
2. Separated the two halves of the outer case.
3. Removed the spring from the broken Catch.
4. Reinstalled the spring on the new Catch.
5. Inserted the new Catch with spring.
6. Positioned the two halves of the case together. ( not any problems aligning the two halves ! 7. Reinstalled the 10 screws. ( very easy and very quick )
Note: At the very low price of the catch, I had ordered 3 Catches in case I break another one.
Catch broke that locks in the blower and vacuum attachment.
Tool Type
Blower
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
, Torx bit to remove self tapping screws.
Parts Used
Catch broken
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
The catch broke off when I was changing the attachment.
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Broken latch
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
2. Opened the blower cover
3. Replaced the latch
4. Closed blower
5. Screwed screws back into place
The catch was broken, the fan worn after about 12 years
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, T15 Torx Screw driver Mastercraft 57-3304-6
Parts Used
Removed 11 Torx screws, replaced catch making sure all moving parts remained in correct position. Replaced 11 screws with a "T15 Torx Screw driver 6".
Easy as pie, works like a charm Thanks for quick delivery of parts to our US relatives for pickup just before our visit to Columbus WI.
The catch had broken
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
Catch broke, very cheap plastic, a metal one would last longer
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Catch Clip broke that holds the blower and or the vacuum on to the unit.
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx
Parts Used
2. Carefully open up the unit and removed the catch part. Note: The catch part had a spring attached to the bottom, Used the spring in the new catch.
3. Replaced the Catch. Note the Catch is connected to the switch, it took some time to figure out the set up.
4. Closed up the unit, and put a couple of screws, tried the unit, it worked, then put back all of the other torx screws.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.