*This part replaces obsolete part #: 753-05830.
Product Information
Description:
This is an authentic Yard Man replacement part sourced directly from the manufacturer. The carburetor is found in trimmers from Yard Man and MTD. This kit includes the carburetor with attached primer bulb, two plastic fuel hoses, and two plastic hose connectors. The carburetor is used to mix fuel and air for ignition in the engine. The primer bulb acts as a suction device and will fill with fuel, then force it into the carburetor. You will require a screwdriver when replacing this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. |
Compatibility
the 37 compatible machines
This part is compatible with the following machines:
Yard Man
41AD452C755 Curved Shaft String Trimmer
41AD457C755 YM4570 Straight Shaft String Trimmer
YM4570 (41AD457C755) Trimmer
41AD457C755 YM4570 Straight Shaft String Trimmer
YM4570 (41AD457C755) Trimmer
Craftsman
MTD
MP475 (41CD475D995) String Trimmer
21AK144G799 (316.29937)(2010) Tiller
25A-515-799 (316.772370)(2008) Edger
25B-515-799 (316.77238)(2010) Edger
21AK144G799 (316.29937)(2010) Tiller
25A-515-799 (316.772370)(2008) Edger
25B-515-799 (316.77238)(2010) Edger
Cub Cadet
CC4105 (41ADC05G912) (2007) Gas String Trimmer
CC4125 (41ADC42C912) (2007) Gas String Trimmer
CC4175 (41ADC47C912) (2007) Gas String Trimmer
CC4105 (41ADC05G912) (2008) Gas String Trimmer
CC4125 (41ADC42C912) (2008) Gas String Trimmer
CC4165 (41ADC46G912) (2008) 41ADC46G Gas String Trimmer
CC4175 (41BDC47C712) (2008) Gas String Trimmer
CC4125 (41ADC42C912) (2007) Gas String Trimmer
CC4175 (41ADC47C912) (2007) Gas String Trimmer
CC4105 (41ADC05G912) (2008) Gas String Trimmer
CC4125 (41ADC42C912) (2008) Gas String Trimmer
CC4165 (41ADC46G912) (2008) 41ADC46G Gas String Trimmer
CC4175 (41BDC47C712) (2008) Gas String Trimmer
CC4125 (41BDC42C712) (2009) Gas String Trimmer
CC4165 (41ADC46G912) (2009) 41ADC46G Gas String Trimmer
CC4165 (41BDC46G912) (2009) 41BDC46G Gas String Trimmer
CC4175 (41BDC47C712) (2009) 41BDC47C Gas String Trimmer
CC4175 (41BDC47C912, 41BDC47C709) (2010) 41BDC47C Gas String Trimmer
ST4125 (41BDC42C912) (2011) 41BDC42C Gas String Trimmer
ST4175 (41CDC47C912) (2011) 41CDC47C912 Gas String Trimmer
CC4165 (41ADC46G912) (2009) 41ADC46G Gas String Trimmer
CC4165 (41BDC46G912) (2009) 41BDC46G Gas String Trimmer
CC4175 (41BDC47C712) (2009) 41BDC47C Gas String Trimmer
CC4175 (41BDC47C912, 41BDC47C709) (2010) 41BDC47C Gas String Trimmer
ST4125 (41BDC42C912) (2011) 41BDC42C Gas String Trimmer
ST4175 (41CDC47C912) (2011) 41CDC47C912 Gas String Trimmer
Troy-Bilt
Products Compatibility
This item works with the following types of products:
- • Cultivator
- • Edger
- • Trimmer
Questions & Answers for Carburetor W/primer
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Cultivator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Vice grips
Would not stay running. Also hard to start.
Pulled off 2 plastic hoses which also came with the carburetor. Took off air filter cover n filter. Used vice grips to take off long screws. Replaced carburetor and screwed everything back on.
I was told not to have it fixed, not worth the cost. Now starts on first or second pull and runs great. Guess worth fixing it on my own.
I was told not to have it fixed, not worth the cost. Now starts on first or second pull and runs great. Guess worth fixing it on my own.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Cultivator
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Socket set
tiller would not stay running
1. replaced the fuel lines due to rot
2. removed the air cleaner assembly
3. removed the carburetor
4 i put a little fel pro gasket on the paper gasket
5. installed the new carb and reinstalled the aircleaner.
6. primed the bulb and pulled the cord twice and it runs like a top.
Only problem is the studs that secure the carb to the block are a speciality tool that is not available. I had to use pliers to remove the studs.
2. removed the air cleaner assembly
3. removed the carburetor
4 i put a little fel pro gasket on the paper gasket
5. installed the new carb and reinstalled the aircleaner.
6. primed the bulb and pulled the cord twice and it runs like a top.
Only problem is the studs that secure the carb to the block are a speciality tool that is not available. I had to use pliers to remove the studs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information