*This part replaces obsolete part #: 951-10948.
Product Information
Compatibility
the 24 compatible machines
This part is compatible with the following machines:
Yard Machines
31A-2M1A752 (2010) Single-Stage Snowblower
31A-2M1A752 (2009) Single-Stage Snowblower
31A-2M1A752 (2008) Single-Stage Snowblower
31A-2M1E700 (2011) Walk Behind Snowblower
31A-2M1E752 (2011) Walk Behind Snowblower
31A-2M1A700 (2009) Snowblower
31A-2M1A729 (2009) Snowblower
31A-2M1A752 (2009) Single-Stage Snowblower
31A-2M1A752 (2008) Single-Stage Snowblower
31A-2M1E700 (2011) Walk Behind Snowblower
31A-2M1E752 (2011) Walk Behind Snowblower
31A-2M1A700 (2009) Snowblower
31A-2M1A729 (2009) Snowblower
31A-2M1A762 (2009) Snowblower
31A-2M1E700 (2016) Snow Thrower
31A-2M1E700 (2017) Snow Thrower
31A-2M1E700 (2018) Snow Thrower
31A-2M1E752 (2016) Snow Thrower
31A-2M1E752 (2017) Snow Thrower
31A-2M1E752 (2018) Snow Thrower
31A-2M1E700 (2016) Snow Thrower
31A-2M1E700 (2017) Snow Thrower
31A-2M1E700 (2018) Snow Thrower
31A-2M1E752 (2016) Snow Thrower
31A-2M1E752 (2017) Snow Thrower
31A-2M1E752 (2018) Snow Thrower
Craftsman
MTD
Troy-Bilt
Products Compatibility
This item works with the following types of products:
- • Engine
- • Snowblower
Questions & Answers for Carburetor Kit-maj
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Only ran with choke closed.
Remove the carburetor
Make notes when taking the carb apart
Lay the parts on a clean towel in the order that you removed them
Clean the carburetor and the parts that will still be used with carb cleaner, then push fishing ling into the small orifices to clean them. Do not use wire.
Put the carb back together with the new and old parts
Take your time
Make notes when taking the carb apart
Lay the parts on a clean towel in the order that you removed them
Clean the carburetor and the parts that will still be used with carb cleaner, then push fishing ling into the small orifices to clean them. Do not use wire.
Put the carb back together with the new and old parts
Take your time
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information