Easy
30-60 minutes
This replacement carburetor is a genuine OEM supplied components that is specially designed for use on Echo handheld blowers. The purpose of a carburetor is to mix air and gas into a combustible mixture that is sent to the engine. Difficulty starting, rough idle, high idle, false-start, no-start, excessive fuel consumption, fuel leakage: these are the signs of a carburetor in decline. When they begin to multiply, it might be wise to change the entire assembly. When replacing carburetor it is advised to replace carburetor gaskets to ensure proper seal. Please note this assembly is sold individually, it includes a metal carburetor and a flexible rubber primer bulb.
Carburetor -- C1u-k42 12520020565
OEM part for: Echo
Part Number: 12520020565
$59.31
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Echo
PB-2100 (Type 1E) (After S/N 001001) Handheld Blower View Diagrams & Manuals
This item works with the following types of products:
- Blower Parts
This part replaces obsolete part #: 12520020564, 12520020563, 12520020562, 12520020561, 12520020560
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor -- C1u-k42
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Hard to start and ran poorly
Phillip - September 10, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed the air cleaner assembly. Removed the fuel lines and throttle from the old carburetor. Remove the old carburetor. Installed the new carburetor and the attached the fuel lines and throttle. Then attached the air cleaner assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The carb was still leaking after rebuilding it with new gaskets, installed new carburetor.
Brian - December 24, 2017
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Safety first, run the blower out of gas or empty the tank
1. Pull start cord and wrap around to move pull handle out of the way
2. Remove the air filter cover and filter
3. Remove 2 screws holding on the carb to the intake
4. Remove old carb gasket.
5. Good time to clean while carb is off.
Install is same in reverse order.
NOTE:
Be careful while working with the throttle rod, if it comes off, you will have to removed the outer case, not hard, but necessary.
1. Pull start cord and wrap around to move pull handle out of the way
2. Remove the air filter cover and filter
3. Remove 2 screws holding on the carb to the intake
4. Remove old carb gasket.
5. Good time to clean while carb is off.
Install is same in reverse order.
NOTE:
Be careful while working with the throttle rod, if it comes off, you will have to removed the outer case, not hard, but necessary.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
