Easy
15-30 minutes
This replacement carburetor is sourced from original equipment manufacturer for use with Weed Eater gas trimmers/edgers. The purpose of a carburetor is to supply a combustible mixture of fuel and air to the engine. It has a metal body and a rubber primer bulb. Please note gaskets are sold separately.
To complete this repair you would need a hex key/allen wrench.
• Remove air box cover and base
• Disconnect fuel hose
• Remove old carburetor and install the new one
• Re-assemble and test the unit
Carburetor Assembly 530071634
OEM part for: Weed Eater, Craftsman, Husqvarna
Part Number: 530071634
$68.49
In Stock
Order within the next 2 hours and your part ships today! 
Product Description ?
- Classification: Part
- Weight: 0.24 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 17 machines
Weed Eater
PE550 Gas Trimmer View Diagrams & Manuals
GE21 Gas Edger View Diagrams & Manuals
PE550 Type 1 Gas Edger View Diagrams & Manuals
PE550 Type 2 Gas Edger View Diagrams & Manuals
PE550 Type 3 Gas Edger View Diagrams & Manuals
PE550 Type 4 Gas Edger View Diagrams & Manuals
PE550 Type 5 Gas Edger View Diagrams & Manuals
Craftsman
358797750 Gas Edger View Diagrams & Manuals
358797450 Edger View Diagrams & Manuals
35877310 Edger View Diagrams & Manuals
358773110 Edger View Diagrams & Manuals
Husqvarna
GE21 (2006-07) Edger View Diagrams & Manuals
PE550 (Type 1) (530087525) (2008-06) Handheld Trimmer View Diagrams & Manuals
PE550 (Type 2) (530087525) (2008-06) Handheld Trimmer View Diagrams & Manuals
PE550 (Type 3) (530087525) (2008-06) Handheld Trimmer View Diagrams & Manuals
PE550 (Type 4) (530087525) (2008-06) Handheld Trimmer View Diagrams & Manuals
PE550 (Type 5) (530087525) (2008-06) Handheld Trimmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Trimmer Parts
- Edger Parts
This part replaces obsolete part #: 530069654
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Simple bolt on replacement
My go-to site for replacement parts. Arrived ahead of schedule. Bolted on a new carb and my edger started right up.
Guest -
May 22, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Engine would not start / bad carburetor
James - March 25, 2016
👍 8 of 8 people found this instruction helpful
Tool Type
Edger
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, allen wrench
Parts Used
Remove the air cleaner assembly, Remove the fuel lines from the old carburetor and place them on the new one. Do the same with the throttle link. Replace the air cleaner assembly. Pump the primmer until you don't see any air in the line, Pull the starter a few times and get back to work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old carb sat to long
derek - November 13, 2015
👍 4 of 4 people found this instruction helpful
Tool Type
Edger
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrenches
Parts Used
Removed two allen screws. Removed old carb. Replaced with new. Primed the carb with the push bulb. It fired on the 5th pull.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ethanol damaged carburetor and would not start
James - September 30, 2016
👍 3 of 4 people found this instruction helpful
Tool Type
Edger
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
1. Removed carburetor.
2. Removed fuel tank
3. Replaced deteriorated fuel lines
4. Installed fuel tank
5. Installed replacement carburetor
6. Installed replacement air filter
2. Removed fuel tank
3. Replaced deteriorated fuel lines
4. Installed fuel tank
5. Installed replacement carburetor
6. Installed replacement air filter
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor not working & cylinder housing loose
Julian - December 9, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Edger
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, allen wrenches
Edger would not start. No gas getting to cylinder. Replaced carburetor. Still didn't run. Took edger apart. Removed cylinder housing which was loose. Replaced gaskets and tightened bolts to cylinder housing. Reinstalled carburetor. Edger started and ran fine..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wouldnt start and stay running
Kirk - May 2, 2019
Tool Type
Edger
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Hex Allen
Parts Used
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad carb
Bruno - October 24, 2016
Tool Type
Edger
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Power Drill
Parts Used
1. Drained fuel
2. Disconnected the fuel lines
3. Removed the old carburetor
4. Secured the new carburetor
5. Reattached the lines
2. Disconnected the fuel lines
3. Removed the old carburetor
4. Secured the new carburetor
5. Reattached the lines
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Primer bulb had cracked.
Aubrey - July 15, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Nutdriver
Parts Used
1. Removed filter cover and replaced filter
2. Removed 2 5/16" Nuts that secured the whole assembly
3. Replaced Gasket between Head and Carburetor assembly
4. Replaced Carburetor assembly an secured with the 2 5/16" nuts
5. Replaced filter caver and filter
Note: In the event that the throttle cable is too slack or tight Do Not Disassemble the trigger housing. Just loosen very slightly the securing screws and slide the assembly in one direction or the other to loosen or tighten the throttle cable. AS the throttle trigger spring if disengaged from the throttle trigger is a REAL BEAR to get back in place.
2. Removed 2 5/16" Nuts that secured the whole assembly
3. Replaced Gasket between Head and Carburetor assembly
4. Replaced Carburetor assembly an secured with the 2 5/16" nuts
5. Replaced filter caver and filter
Note: In the event that the throttle cable is too slack or tight Do Not Disassemble the trigger housing. Just loosen very slightly the securing screws and slide the assembly in one direction or the other to loosen or tighten the throttle cable. AS the throttle trigger spring if disengaged from the throttle trigger is a REAL BEAR to get back in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
