Carburetor Assembly 753-06220B
Part Number: 753-06220B
Order within the next 5 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 753-06220A and 753-06220.
Product Information
Description:
This is an Original Manufacturer Approved Carburetor Kit which includes a Metal Body Carburetor, a Carburetor Gasket and a Plastic Intake Manifold. It is used on a variety of Gas Powered String Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. |
Frequently Purchased With
Compatibility
the 32 compatible machines
This part is compatible with the following machines:
Troy-Bilt
TB575EC (41ADT57C766) Gas String Trimmer
TB575EC (41EDT57C966) Gas String Trimmer
TB525EC (41ADZ52C766) Curve Shaft Gas String Trimmer
TB525EC (41ADZ52C966) Curve Shaft Gas String Trimmer
TB525EC (41EDT52C966) String Trimmer
TB539ES (41CDT53C966) 4-Cycle Gas Trimmer
TB539ES (41DDT53C966) 4-Cycle Gas Trimmer
TB525ES (41DDT52C966) Trimmer
TB590EC (41ADZ59C766) Trimmer
TB575EC (41EDT57C966) Gas String Trimmer
TB525EC (41ADZ52C766) Curve Shaft Gas String Trimmer
TB525EC (41ADZ52C966) Curve Shaft Gas String Trimmer
TB525EC (41EDT52C966) String Trimmer
TB539ES (41CDT53C966) 4-Cycle Gas Trimmer
TB539ES (41DDT53C966) 4-Cycle Gas Trimmer
TB525ES (41DDT52C966) Trimmer
TB590EC (41ADZ59C766) Trimmer
TB590EC (41ADZ59C966) Trimmer
TB590EC (41BDT59C966) Trimmer
TB590EC (41CDT59C966) Trimmer
TB146EC (21CK146G966) Tiller
TB525EC (41ADZ52C866) Trimmer
TB525EC (41BDZ52C766) Trimmer
TB525EC (41BDZ52C866) Trimmer
TB525EC (41CDZ52C766) Trimmer
TB575ES (41DDT57C966) Trimmer
TB590EC (41BDT59C966) Trimmer
TB590EC (41CDT59C966) Trimmer
TB146EC (21CK146G966) Tiller
TB525EC (41ADZ52C866) Trimmer
TB525EC (41BDZ52C766) Trimmer
TB525EC (41BDZ52C866) Trimmer
TB525EC (41CDZ52C766) Trimmer
TB575ES (41DDT57C966) Trimmer
MTD
Craftsman
Cub Cadet
BC509 (41BD591C912) (2013) 41BD591C912 Gas String Trimmer
SS418 (41BDZ41C912) (2013) 41BDZ41C912 Gas String Trimmer
BC509 (41BD591C912) (2014) 41BD591C912 Gas String Trimmer
SS418 (41BDZ41C912) (2013) 41BDZ41C912 Gas String Trimmer
BC509 (41BD591C912) (2014) 41BD591C912 Gas String Trimmer
SS418 (41ADZ41C912) (2014) 41ADZ41C912 Gas String Trimmer
BC509 (41BD591C912) (2015) 41BD591C912 Gas String Trimmer
BC509 (41BD591C912) (2015) 41BD591C912 Gas String Trimmer
Yard Machines
Products Compatibility
This item works with the following types of products:
- • Trimmer
Questions & Answers for Carburetor Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
13 of 21 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Runs at idle, then cuts off when throttle is increased
I have an old troy built trimmer, and the motor kept sputtering, and idle but shut off when throttle was added. I decided to replace the carburetor. I removed the housing, and air cleaner, then removed the carb. Install the new carb by reconnecting the fuel lines (make sure they are in the correct spot), reconnect the throttle cable, then just put the air cleaner, and cover back.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Power Drill, Socket set, Wire cutter
Engine would not run
Removed old fuel tank, air filter housing and carburetor by removing 4 screws
Installed new fuel tank, carb, air filter housing
Cut fuel lines to correct length
Pressed fuel lines onto connectors
Removed spark plug with socket wrench and replaced new one
Filled with gas, pumped primer bulb 6 times
Started on fourth pull and ran like a champ
Installed new fuel tank, carb, air filter housing
Cut fuel lines to correct length
Pressed fuel lines onto connectors
Removed spark plug with socket wrench and replaced new one
Filled with gas, pumped primer bulb 6 times
Started on fourth pull and ran like a champ
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 7 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Would not stay running
Popped the air cleaner cover off, pulled 2 bolts, 2 fuel lines, and the throttle cable. Popped the new carb on and reassembled and it runs like a brand new one!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set
not running right, stalling out
replaced old carb, fuel filter, hoses
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Difficult to start and leaked fuel.
Replaced carburetor
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Wouldn't start.
Removed carburetor and replaced with new assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Power Drill
Would not run
Removed carberator
Installed new carb
Installed new carb
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
Carburetor was malfunctioning.
TroyBilt TB539ES trimmer: New carb was slightly different. A small air hole in the base didn't line up with hole in gasket, so I punched new hole in gasket. It looked important. Gas lines left carb in a different direction but rerouting these lines was not a problem. Throttle cable assembly lined up perfect. Trimmer now runs perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
gas was not getting to the carburetor try to clean old carburetor did not work
I watch the video on eReplacement Parts.com
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
would not run other than idle
removed old fuel lines
removed new carb.
installed new carb
installed new fuel lines
started engine and adjusted Idle speed
removed new carb.
installed new carb
installed new fuel lines
started engine and adjusted Idle speed
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
10 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
2
3 stars
1
2 stars
1
1 stars
0
< PREV
- 1
Carburetor replacement
I ordered a carburetor from here and not knowing just what I needed for sure or if I could even get what I needed was kinda stressful. But as I talked to the rep she put my mind to ease and got me the right part, and not only did it fit the first time BUT it worked just as well and my weed eater came alive with the first pull, amazing how things work when you get the correct help. Tom Worswick
Guest -
August 2, 2021
Verified Purchase
Easy repair and fast shipping
I bought the carburetor for my Troy-Bilt string trimmer. The old carb died and it would not start anymore. I saw some videos on You Tube on possible issues and I found this website on one of the videos. I’m glad I found it. I went thru their catalog and I ordered the carb. Installation was super simple they even had a video on how to install it. I put gas on the trimmer and it started right up. I was so happy that I didn’t have to buy another trimmer. I highly recommend this website and I will definitely be using them again.
Guest -
May 4, 2021
Verified Purchase
Perfect fit, Easy installation
The new carburetor was for my weed Wacker and did the trick. Installed easy and started first pull.
Terry -
April 20, 2021
Verified Purchase
Just what I needed!
The correct part, great price.
This was my second purchase, and I am very satisfied with the service!
Guest -
October 1, 2020
Verified Purchase
Troy bilt replacement carb
The carburetor fit exactly as it should. Put it on and string trimmer fired right up.
Guest -
May 13, 2020
Verified Purchase
Easy ordering
Part was correct and arrived with short delivery time. Always have great service at fair prices.
Guest -
September 21, 2019
Verified Purchase
Worked as expected
Installed part and after priming the carburetor the weed eater started on the first pull. Good parts a little expensive but hey it worked.
Dennis -
April 27, 2021
Verified Purchase
Great
Needed a new diaphragm for carb on weed eater. Nobody has just that. So this was inexpensive and works great so far. 2 weeks of use.
Stephen -
May 3, 2019
Verified Purchase
Good Parts Poor Service
Ordered a couple of parts, paid for expedited shipping, but they were never sent, was told FedEx didn't pick them up? Instead of reshipping they cancelled the order, easy enough to reorder and they turned up three days later or two weeks after original order.
Guest -
May 15, 2019
Verified Purchase
Somewhat disappointed.... Kit did not match the trimmer model provided.
The carburetor kit was not an exact replacement for my trimmer. The plastic manifold did not fit the unit. I needed to use the old manifold with the new carburetor. There's seems to be a flaw in the ordering system. I used the Model/Serial Number direcrtly from the unit to place the order. Evidently the ordering process needs more information to determine the correct kit.
Guest -
July 15, 2022
Verified Purchase
eReplacementParts Team
Hi Ray,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
Verified Purchase
eReplacementParts Team
< PREV
- 1