Easy
Less than 15 minutes
Genuine Manufacturer Approved replacement part designed for certain Bosch Rotary Hammers. This is a Set of 2 Carbon Brushes with wire lead attached.
Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Carbon Brush Set 1617014135
OEM part for: Bosch
Part Number: 1617014135
Order within the next 56 minutes and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.03 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 6 machines
Bosch
This item works with the following types of products:
- Rotary Hammer Parts
- Demolition Hammer Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carbon Brush Set
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The rotary hammer suddenly stopped working, even though the power green LED light was still on.
Tool Type
Rotary Hammer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
2- Located the two brushes, which are inserted in rectangular tubes located at opposite ends of the rotor. One of the brushes was worn to the point where the wire that goes inside the carbon was exposed.
3- With needle-nose pliers, disconnected the brushes.
4- With the pliers, lifted the springs that hold down the brushes. Removed the brushes from the tubes.
5- Inserted new brushes in tubes.
6- Reconnected the brushes exactly as the old ones, paying attention to the fact that one of the brushes has two wires to be connected, while the other brush has only one wire.
7- Closed the access compartment.
8- Ready to go back to work.
Old brushes were worn out
Tool Type
Rotary Hammer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Lifted out the brush springs and place the on the holder
Remove the old brush from the holders
Installed the new brushes in the holders
Connected the brush wires, and replaced the brush springs
Worn brushes.
Tool Type
Rotary Hammer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Drill would not engage immediately when depressing the trigger. At times drill had to be bounced onto a solid object to get it to it to work
Tool Type
Hammer Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
In hammer dill mode motor would run at slow speed regardless of the power switch position
Tool Type
Rotary Hammer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
