Grid squares measure 1x1 inch

Watch The
Repair Video

Carbon Brush 22-18-0910

Part Number: 22-18-0910

15 Reviews

Order within the next 47 minutes
and your part ships today!

Questions & Answers

Repair Instructions

Product Information

Description:

Genuine Milwaukee replacement part
Includes 1 Carbon Brush with wire lead and brush spring attached.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• 2 Required for a set.
• New brushes can restore a motor’s electric braking

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Warning: California's Proposition 65

Frequently Purchased With

Brush Retainin..
$9.03

Brush Holder A..
$9.55

Blade Clamp
$4.99

Carbon Brush
$4.99

Ball Bearing
$7.72

Compatibility

This part is compatible with the following machines:

Milwaukee

6518-75 (SER 985A) Sawzall
6537-22 (SER 916D) Sawzall
6511 (SER 460D) Sawzall
6509-21 (SER 962E) Sawzall
6518-55 (SER 859B) Sawzall
6527-21 (SER 963A) Sawzall
1101-1 (SER 493D) 1/2" Reversing Drill
1101-1 (SER 493E) 1/2" Reversing Drill
1007-1 (SER 628D) 1/2 D-Handle Drill 0-600 RPM with Quik-Lok cord
1007-1 (SER 628E) 1/2 D-Handle Drill 0-600 RPM with Quik-Lok cord
6509-21 (SER 962A) Sawzall
6509-21 (SER 962B) Sawzall
6509-21 (SER 962D) Sawzall
1201-1 (SER 495D) 1/2" Reversing Drill
6507 (SER 631E) Trigger Speed Control Sawzall
6507 (SER 631F) Trigger Speed Control Sawzall
6507 (SER 631G) Sawzall
6509 (SER 808C) D.I. Sawzall
6509 (SER 808D) D.I. Sawzall
6517-20 (SER 917C) TSC Sawzall w/Quik-Lok Blade Clamp
6517-20 (SER 917D) Sawzall Plus
6517-20 (SER 917E) Sawzall Plus
6527-21 (SER 963B) Super Sawzall w/Quik-Lok Blade Clamp
6527-21 (SER 963C) Super Sawzall w/Quik-Lok Blade Clamp
6527-21 (SER 963D) Super Sawzall
6528 (SER 775D) Super Sawzall
6528 (SER 775E) Super Sawzall
6528 (SER 775G) Super Sawzall
6537-22 (SER 916E) Super Sawzall w/Quik-Lok Blade Clamp
6537-22 (SER 916G) Super Sawzall w/Quik-Lok Blade Clamp
6537-22 (SER 916H) Super Sawzall
6537-22 (SER 916J) Super Sawzall
6537-75 (SER 986A) 75th Anniversary Super Sawzall
3107-6 6-1/2 In. Right Angle Drill
1107-6 1/2" Reversing Drill with Quik-Lok Cord

Expand the 70 compatible machines

Products Compatibility

This item works with the following types of products:

• Drill
• Electric Drill
• Saw

Repair Guides

Watch the Repair Video for Carbon Brush

Questions & Answers for Carbon Brush

Sort by

will these brushes fit my drill?

Larry for model number 1101-1 asked on 2022-07-07

Hi Larry, Thank you for your question. The carbon brush and spring are sold individually. The part number listed under your model number for the carbon brush is 22-16-0275. The part number listed for the spring is 23-52-0160. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Related Parts: Carbon Brush Brush Spring

Repair Instructions: Submitted by Customers Like You

10 of 12 people found this instruction helpful

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Needed new brushes

Remove both brush caps form each side of motor housing. Pull out old brushes, then replace with the new brushes. Install the brush caps. Tool works great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Worn brushes

Remove the brush caps. Remove the old brushes. Install then new brushes. Install the brush caps.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Losing power and smoking under load

Removed the brush caps
Removed the old brushes
Installed the new brushes
Installed the brush caps

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes were worn out.

Remove the old ones and put in the new ones.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes worn out, drill didn't run as suppose to

Unscrew where the brushes are and slide new one in, that's simple.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Electric Drill

Parts Used:

Speed Control Switch - 23-66-2148

Carbon Brush - 22-18-0910

Repair Difficulty:

Hard

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Dremil & soldering iron

The drill would not work, bad connection in the trigger control

Although the parts were supposed to be for my model 0102-1 (I double checked) the control switch was an updated model for what I think was a digital voltage control (mine was an old analog type) and smoked what was left of the field coils. Plus the brushes were 1/4" x 5/16" to replace my 1/4" square. Needless to say, after all the trouble I went through to fit the switch body into the handle, it turned into junk.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes warn out

Took out old brushes put in new ones.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

sawzall would not start

removed worn brushes and quickly replaced with new in 2 minutes

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

motor would run

replaced carbon brushes on both sides

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Electric Drill

Parts Used:

Carbon Brush - 22-18-0910

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes were worn out

Watched videos about the part. Took 5 minutes at the most.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

15 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Good product

Exactly what I needed.

Mike - April 24, 2023 Verified Purchase

an old millwalky sizzall saw

the brushes were for an old sizzall saw but I had to grind a little to fit but it's working very well again, thanks so much

Luis - September 4, 2021 Verified Purchase

Easy Repair, Great Part!

The brushes were just what I needed to get my drill working again. Faster service than I thought was possible!

Guest - June 10, 2021 Verified Purchase

Great

Fast delivery and good value

Guest - November 30, 2020 Verified Purchase

exactly what was needed

Fit Milwaukee tools as expected. easy to cross parts on this website. Repeat customer.

Guest - August 2, 2020 Verified Purchase

Everything was as expected.

All good

Guest - April 28, 2020 Verified Purchase

Quick delivery!!

Made my 60 year old saw work like new again! Thanks, MB

Guest - March 6, 2020 Verified Purchase

Fast service, easy fix for my sawsall

And the price was right!

Guest - March 3, 2020 Verified Purchase

Fast service

Fast n accurate service ,, saved me time n money. Convenient shopping

Guest - November 6, 2019 Verified Purchase

Easy repair, Great Part

The was in Great condition, perfectly feet

Guest - September 2, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Repair Guides

Watch the Repair Video for Carbon Brush