Carbon Brush N031652
and your part ships today!
*This part replaces obsolete part #: NO31652, 869659 and 824216.
|
This brush is a genuine Porter-Cable replacement part, not generic. As pictured, this brush is ready to install and includes carbon brush, wire lead, and spring. This item is sold individually. Over time, brushes will wear down and eventually require replacement. This brush will fit the models listed in the 'Compatibility' section below. It is not guaranteed to fit any other power tool models. • Worn brushes are often the cause of a poorly running motor
|
This part is compatible with the following machines:
6302 Type 2 Router
6302 Type 3 Router
6302 Type 4 Router
690 Fixed Base Router
6902 Type 1 Router Motor
6902 Type 2 Router Motor
6902 Type 3 Router Motor
6902 Type 4 Router Motor
6902 Type 5 Router Motor
6902 Type 6 Router Motor
6902 Type 7 Router Motor
6902 Type 8 Router Motor
690LR Fixed Base Router
690LRVS Fixed Base Variable Speed Router
691 Type 1 D Handle Router
691 Type 2 D Handle Router
691 Type 3 D Handle Router
691 Type 4 D Handle Router
691 Type 5 D Handle Router
691 Type 6 D Handle Router
691 Type 7 D Handle Router
6911 Type 1 D Handle Route Base
6911 Type 2 D Handle Route Base
6911 Type 3 D Handle Route Base
6911 Type 4 D Handle Route Base
6911 Type 5 D Handle Route Base
6911 Type 6 D Handle Route Base
6911 Type 7 D Handle Route Base
6912 Type 1 D Handle Router
6912 Type 2 D Handle Router
6912 Type 3 D Handle Router
6912 Type 4 D Handle Router
6912 Type 5 D Handle Router
6912 Type 6 D Handle Router
694917 Type 1 D Handle Router
694917 Type 2 D Handle Router
694917 Type 3 D Handle Router
694917 Type 4 D Handle Router
694917 Type 5 D Handle Router
694917 Type 6 D Handle Router
694917 Type 7 D Handle Router
503 Type 1 3x24 Belt Sander
503 Type 2 3x24 Belt Sander
504 Type 1 3x24 Belt Sander
504 Type 2 3x24 Belt Sander
86902 Type 1 Router
86902 Type 2 Router
694 Type 1 1-3/4HP Variable-Speed Multi-Base Router
A3 Locomotive Belt Sander
315 Type 1 Rockwell Circular Saw
315 Type 1 Rockwell Circular Saw
630 Type 1 1HP Router
6702 Type 1 Router Motor
9690 (All Types) Router Kit
J-630 (All Types) Router 1 Hp
J-6702 (Type 1) Router Motor
J-346 (Type 1) Saw 6-3/4 Builders
694VK (Type 1) 1-3/4 Hp Vs Rout Kit
690 Router 1 1/2 Hp Power Tool
690LR (Type 1) 1-3/4hpfb Router/Lev Power Tool
690LRVS (Type 1) 1-3/4hpfb Vs Rout/Le Power Tool
86902 (Type 8) Mtr 5amp 240v Rtr Power Tool
9690-SBD Router Kit Power Tool
J-630 Router 1 Hp Power Tool
503-BDK (Type 1) 3x24 Blt Sander Dst Xhd Power Tool
503-BDK (Type 2) 3x24 Blt Sander Dst Xhd Power Tool
J-315 (Type 1) Rockwell Saw Power Tool
This item works with the following types of products:
- • Circular Saw
- • Engine
- • Router
- • Sander
- • Saw
This article outlines the steps needed to replace the brushes in a Porter Cable 690 series router. ...
November 14, 2011
|
Questions & Answers for Carbon Brush
Install the new brushes, then screw in the new brush caps
Original brush cap fell out and caused the circular saw not to have full power.
2. Remove the old brushes and install the new brushes.
3. Replace the brush caps.
4. Remove the top motor housing cap.
5. Remove the cord clamp.
6. Remove the cord wires from the switch.
7. Slide the cord relief off of the old cord and put it on the new cord.
8. Attach the new cord to the switch.
9. Attach the cord clamp.
10. Replace the top motor housing cap.
It literally took longer to order the parts than it took to complete the repair.
- 1
- 2
- 1
- 2
This article outlines the steps needed to replace the brushes in a Porter Cable 690 series router. ...
November 14, 2011
|