eReplacementParts.com
877-346-4815
Bosch Parts
Repair Parts Home
  
Power Tool Parts
  
Bosch Parts
  2610007957 Carbon Brush Set

Carbon Brush Set 2610007957

OEM part for: Bosch

Part Number: 2610007957


Install
Videos!
Carbon Brush Set - 2610007957:Bosch 360 View
Carbon Brush Set - 2610007957:BoschCarbon Brush Set - 2610007957:BoschCarbon Brush Set - 2610007957:Bosch 360 View
In Stock
Order within the next 11 hours and your part ships today!
Easy 15-30 minutes (10 rated repairs)?
OEM: Original Equipment Manufacturer ?
Bosch
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Bosch replacement part
Set of 2 Carbon Brushes with wire lead attached.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 24 machines

Bosch

1613 (0601613034) Plunge Router View Diagrams & Manuals
1613AEVS (0601613639) Plunge Router View Diagrams & Manuals
1613EVS (0601613734) Plunge Router View Diagrams & Manuals
1634VS (0601634739) Reciprocating Saw View Diagrams & Manuals
1634VS (0601634839) Reciprocating Saw View Diagrams & Manuals
1617 (0601617161) Router View Diagrams & Manuals
1617EVS (0601617739) Router View Diagrams & Manuals
1617 (0601617039) Shop Router View Diagrams & Manuals
1618 (0601618039) Shop Router View Diagrams & Manuals
1618EVS (0601618739) Shop Router View Diagrams & Manuals
B1450 (0601613735) Plunge Router View Diagrams & Manuals
16171 (0601617139) 2HP Router Motor View Diagrams & Manuals
16176 (0601617639) 2.25HP Router Motor View Diagrams & Manuals
16181 (0601618139) 2HP Router Motor View Diagrams & Manuals
16186 (0601618639) 2.25HP Router Motor View Diagrams & Manuals
13020 (0601617570) Router View Diagrams & Manuals
1613AEVS (0601613663) Router View Diagrams & Manuals
MRF23EVS (3601F24010) 2.3 HP Fixed-Based Router View Diagrams & Manuals
1617 (06016170A0) Router View Diagrams & Manuals
1617 (0601617139) Router View Diagrams & Manuals
1617EVS (0601617639) Router View Diagrams & Manuals
1617EVS (06016176A0) Router View Diagrams & Manuals
1618EVS (0601618639) Router View Diagrams & Manuals
1618EVS (06016186A0) Router View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Router Parts
  • Reciprocating Saw Parts
  • Saw Parts
  • Engine Parts

This part replaces obsolete part #: 3604321514

Customer Part Reviews ?

4.8
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • worked very well
    good shipping time! installed the part back in business
    Guest - November 13, 2021 Verified Purchase
    I received the exact parts needed at a good price.
    I received the exact parts needed. eReplacementParts Video was a tremendous help.
    Guest - October 14, 2021 Verified Purchase
    Fast delivery and correct part
    Will do business with them again.
    Guest - February 2, 2021 Verified Purchase
    Perfect fit, arrived quickly
    My router needed a bearing, so I ordered both bearings and brushes. They are cheap and easy to replace since it was already apart. Everything arrived very quickly.
    Guest - February 18, 2020 Verified Purchase
    brushes for Bosch router
    The ordering of the parts was a little confusing, as there were two parts listed that didn't look at all similar but both were listed as being for my router. The pictures made it look like I wanted the cheaper version, so I got that, which in fact was the replacement for the existing brushes. I am wondering what the more expensive ones were, perhaps some heavier duty or longer lasting version. At any rate, I got what I needed, in a timely fashion and at a good price so I'm happy.
    Guest - November 5, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (10 rated repairs)?

    Worn out brushes, and bad trigger on and off switch

    Dan - December 8, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    Removed the top cover to expose the brushes, retracted the spring holding the brushes against the armature. Disconnected the wire, and replaced with new brushes.

    Removed the cover plate exposing the on and off trigger. Disconnected the wires and installed them one at a time in the new switch. Closed everything up and plugged the router in and it works fine.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Need a new switch and brushes on my Bosch router

    Richard - December 24, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Power Drill, Driver bit

    Remove the top cover
    Disconnect the old switch leads, remove the switch
    Connect the new switch leads
    Disconnect the brush leads
    Pull back the brush springs, remove the old brushes and install the new brushes
    Connect the new brush leads
    Replace the top cover
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Router wont start

    Bill - December 27, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    Removed 2 screws on router top and pulled retainer spring covering brushes. Pull connection off of brush and replace with new. easy peasy
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Speed varied by itself under load or unloaded as router warmed up.

    David - August 11, 2023
    Tool Type

    Router

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Replaced carbon brushes and speed control. Brushes were probably okay, but cheap to replace with the router already apart. Found the speed control was defective, changing output as it warmed up.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    on/off switch burned out.

    Robert - August 9, 2023
    Tool Type

    Router

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Power Drill, torgues head drivers

    removed the top cover.
    checked the brushes; they were very worn, ordered new brushes.
    checked the power cord; it was good.
    bypassed the start switch with a jumper wire and the unit started right up.
    removed the switch and checked continuity; nothing in either position.
    replaced brushes and switch and checked speed control; all was good.
    replaced the cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The pointer went missing. I found the replacement here. All good! Thanks!

    Mark - February 2, 2022
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , none needed

    Slid the new pointer onto the rod. Easy! Was happy to find the part here!

    The carbon brushes are spares since Bosch no longer makes this router.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Router shaft wobble and vibration

    Phillip - October 13, 2021
    Tool Type

    Router

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    Removed top cover (4 screws).
    Removed brushes (2 screws on each brush holder).
    Removed plunge base.
    Removed nut on lower shaft (recessed in bottom of housing).
    Removed upper and lower bearings.
    Replaced bearings and re-assembled.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Power switch failed.

    Paul - July 9, 2018
    Tool Type

    Router

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Removed the top of the router plastic cover
    Removed the switch and the brushes
    Installed new parts

    Everything works well now.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes worn out and collet shattered.

    Douglas - March 28, 2018
    Tool Type

    Router

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    Removed the broken pieces and replaced them with the new ones with parts ordered from ereplacement.com which were ordered and delivered within 6 days.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Carbon brushes were worn after some twenty-five years of use.

    Russell - May 30, 2016
    Tool Type

    Router

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Simply a matter of replacing the brushes. Disconnect the tool. Remove the cover. Take out old brushes and secure the new ones in place. Reassemble and test the tool.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal